A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

G

g2d - Static variable in class org.reprap.utilities.RrGraphics

gcode - Variable in class org.reprap.devices.GCodeExtruder

gcode - Variable in class org.reprap.machines.GCodeRepRap

our class to send gcode instructions

gcodeExtension - Static variable in class org.reprap.comms.GCodeReaderAndWriter

How does the first file name in a multiple set end?

GCodeExtruder - Class in org.reprap.devices

GCodeExtruder(GCodeReaderAndWriter, int, Printer) - Constructor for class org.reprap.devices.GCodeExtruder

gcodeLoaded - Variable in class org.reprap.gui.botConsole.PrintTabFrame

gcodeLoaded - Variable in class org.reprap.machines.GenericRepRap

GCodeReaderAndWriter - Class in org.reprap.comms

GCodeReaderAndWriter() - Constructor for class org.reprap.comms.GCodeReaderAndWriter

GCodeRepRap - Class in org.reprap.machines

GCodeRepRap() - Constructor for class org.reprap.machines.GCodeRepRap

GCodeStepperMotor - Class in org.reprap.devices

GCodeStepperMotor(GCodeRepRap, int) - Constructor for class org.reprap.devices.GCodeStepperMotor

gCodeToFileRadioButton - Variable in class org.reprap.gui.botConsole.PrintTabFrame

generateAllPairs(BooleanExpression[]) - Static method in class org.reprap.utilities.CodeGenerator

generateAllTripples(BooleanExpression[]) - Static method in class org.reprap.utilities.CodeGenerator

generateQuadTree(BooleanGrid.iPoint, BooleanGrid.iPoint, RrCSG) - Method in class org.reprap.geometry.polygons.BooleanGrid

Generate the entire image from a CSG experession recursively using a quad tree.

GenericExtruder - Class in org.reprap.devices

GenericExtruder(int, Printer) - Constructor for class org.reprap.devices.GenericExtruder

GenericExtruderTabPanel - Class in org.reprap.gui.botConsole

GenericExtruderTabPanel() - Constructor for class org.reprap.gui.botConsole.GenericExtruderTabPanel

Creates new form GenericExtruderTabPanel

GenericRepRap - Class in org.reprap.machines

GenericRepRap() - Constructor for class org.reprap.machines.GenericRepRap

GenericStepperMotor - Class in org.reprap.devices

GenericStepperMotor(Address, int) - Constructor for class org.reprap.devices.GenericStepperMotor

get(int) - Method in class org.reprap.geometry.polygons.AllSTLsToBuild

Get the i-th STLObject

get(BooleanGrid.iPoint) - Method in class org.reprap.geometry.polygons.BooleanGrid

The value at a point.

get(int) - Method in class org.reprap.geometry.polygons.BooleanGridList

Return the ith shape

get(int) - Method in class org.reprap.utilities.TableRow

get5D() - Method in class org.reprap.devices.GenericExtruder

Find out if we're working in 5D

get5D() - Method in interface org.reprap.Extruder

Find out if we're working in 5D

getAddress() - Method in interface org.reprap.comms.Communicator

getAddress() - Method in class org.reprap.Device

getAngleFeedrate() - Method in class org.reprap.devices.GenericExtruder

getAngleFeedrate() - Method in interface org.reprap.Extruder

getAngleSpeedFactor() - Method in class org.reprap.devices.GenericExtruder

The factor by which to speed up when going round a corner.

getAngleSpeedFactor() - Method in interface org.reprap.Extruder

The factor by which to speed up when going round a corner.

getAngleSpeedUpLength() - Method in class org.reprap.devices.GenericExtruder

The length in mm to speed up when going round corners (non-Javadoc)

getAngleSpeedUpLength() - Method in interface org.reprap.Extruder

getAppearance() - Method in class org.reprap.Attributes

getAppearance() - Method in class org.reprap.devices.GenericExtruder

getAppearance() - Method in interface org.reprap.Extruder

getAppearance() - Method in class org.reprap.gui.STLObject

getAppearance_r(Object) - Static method in class org.reprap.gui.STLObject

dig down to find our appearance

getAppearanceFromMaterial(String) - Static method in class org.reprap.devices.GenericExtruder

getAppearanceFromNumber(int) - Static method in class org.reprap.devices.GenericExtruder

getApplicationBounds() - Method in class org.reprap.gui.Panel3D

getArcCompensationFactor() - Method in class org.reprap.devices.GenericExtruder

The arc compensation factor.

getArcCompensationFactor() - Method in interface org.reprap.Extruder

The arc compensation factor.

getArcShortSides() - Method in class org.reprap.devices.GenericExtruder

The arc short sides.

getArcShortSides() - Method in interface org.reprap.Extruder

The arc short sides.

getAttributes() - Method in class org.reprap.geometry.polygons.RrPolygon

getBackClipDistance() - Method in class org.reprap.gui.Panel3D

getBedTemperature() - Method in class org.reprap.machines.GCodeRepRap

Return the current temperature of the bed

getBedTemperature() - Method in class org.reprap.machines.Simulator

getBedTemperature() - Method in interface org.reprap.Printer

Return the current temperature of the bed

getBedTemperatureTarget() - Method in class org.reprap.machines.GenericRepRap

The temperature we want the bed to be at

getBedTemperatureTarget() - Method in interface org.reprap.Printer

The temperature we want the bed to be at

getBinary() - Method in interface org.reprap.comms.Address

getBinary() - Method in class org.reprap.comms.messages.OutgoingAddressMessage

getBinary() - Method in class org.reprap.comms.messages.OutgoingBlankMessage

getBinary() - Method in class org.reprap.comms.messages.OutgoingByteMessage

getBinary() - Method in class org.reprap.comms.messages.OutgoingIntMessage

getBinary() - Method in class org.reprap.comms.messages.VersionRequestMessage

getBinary() - Method in class org.reprap.comms.OutgoingMessage

Fetch the binary payload corresponding to the completed message

getBinary() - Method in class org.reprap.devices.SNAPExtruder.RequestSetHeat

getBinary() - Method in class org.reprap.devices.SNAPStepperMotor.RequestDDAMaster

getBinary() - Method in class org.reprap.devices.SNAPStepperMotor.RequestOneStep

getBinary() - Method in class org.reprap.devices.SNAPStepperMotor.RequestQueue

getBinary() - Method in class org.reprap.devices.SNAPStepperMotor.RequestSeekPosition

getBinary() - Method in class org.reprap.devices.SNAPStepperMotor.RequestSetSpeed

getBoolFromString(String) - Method in class org.reprap.gui.PreferencesValue

getBotConsoleFrame() - Static method in class org.reprap.gui.botConsole.BotConsoleFrame

getBox() - Method in class org.reprap.geometry.LayerRules

getBox() - Method in class org.reprap.geometry.polygons.RrPolygon

getBox() - Method in class org.reprap.geometry.polygons.RrPolygonList

getCalibration() - Method in class org.reprap.devices.SNAPExtruder.RequestTemperatureResponse

getCanvas3dHeight(Canvas3D) - Method in class org.reprap.gui.Panel3D

getCanvas3dWidth(Canvas3D) - Method in class org.reprap.gui.Panel3D

getChild(int) - Method in class org.reprap.geometry.polygons.treeList

Get the ith polygon child of this one

getCommunicator() - Method in class org.reprap.comms.IncomingContext

getCommunicator() - Method in class org.reprap.Device

getCommunicator() - Method in class org.reprap.devices.SNAPExtruder

getCommunicator() - Method in class org.reprap.devices.SNAPStepperMotor

getCommunicator() - Static method in class org.reprap.Main

getCoolingPeriod() - Method in class org.reprap.devices.GenericExtruder

getCoolingPeriod() - Method in interface org.reprap.Extruder

getCoordinates() - Method in class org.reprap.machines.GCodeRepRap

Get X, Y, Z and E (if supported) coordinates in an array

getCoordinates() - Method in class org.reprap.machines.Simulator

getCoordinates() - Method in interface org.reprap.Printer

Get X, Y, Z and E (if supported) coordinates in an array

getCurrentFeedrate() - Method in class org.reprap.machines.GenericRepRap

Get the feedrate currently being used

getCurrentFeedrate() - Method in interface org.reprap.Printer

Get the feedrate currently being used

getCurrentSpeed() - Method in class org.reprap.devices.GenericExtruder

Find out what our current speed is

getCurrentSpeed() - Method in interface org.reprap.Extruder

Find out what our current speed is

getCurrentX() - Method in class org.reprap.devices.pseudo.LinePrinter

getCurrentY() - Method in class org.reprap.devices.pseudo.LinePrinter

getDefaultAppSize() - Static method in class org.reprap.gui.Utility

getDefaultTemperature() - Method in class org.reprap.devices.GenericExtruder

getDefaultTemperature() - Method in interface org.reprap.Extruder

getDescription() - Method in class org.reprap.utilities.ExtensionFileFilter

getDeviceTemperature() - Method in class org.reprap.devices.SNAPExtruder

getDistance(double) - Method in class org.reprap.devices.GenericExtruder

Get how much extrudate is deposited for a given xy movement currentSpeed is in mm per minute

getDistance(double) - Method in interface org.reprap.Extruder

Get how much extrudate is deposited for a given movement

getDistanceFromTime(double) - Method in class org.reprap.devices.GenericExtruder

Get how much extrudate is deposited in a given time (in milliseconds) currentSpeed is in mm per minute

getDistanceFromTime(double) - Method in interface org.reprap.Extruder

Get how much extrudate is deposited in a given time

getDumpX() - Method in class org.reprap.machines.GenericRepRap

The location of the dump for purging extruders

getDumpX() - Method in interface org.reprap.Printer

The location of the dump for purging extruders

getDumpY() - Method in class org.reprap.machines.GenericRepRap

getDumpY() - Method in interface org.reprap.Printer

getEvenHatchDirection() - Method in class org.reprap.devices.GenericExtruder

The direction to hatch even-numbered layers in degrees anticlockwise from the X axis

getEvenHatchDirection() - Method in interface org.reprap.Extruder

The direction to hatch even-numbered layers in degrees anticlockwise from the X axis

getExpectedAddress() - Method in class org.reprap.comms.IncomingContext

getExtruder() - Method in class org.reprap.Attributes

Find my extruder in the list (if not known) or just return it (if known).

getExtruder(String) - Method in class org.reprap.machines.GenericRepRap

getExtruder() - Method in class org.reprap.machines.GenericRepRap

getExtruder() - Method in interface org.reprap.Printer

getExtruder(String) - Method in interface org.reprap.Printer

getExtruderNumber() - Method in class org.reprap.machines.GenericRepRap

getExtruderNumber() - Method in interface org.reprap.Printer

getExtruders() - Method in class org.reprap.machines.GenericRepRap

getExtruders() - Method in interface org.reprap.Printer

Get the list of all the extruders

getExtruderSpeed() - Method in class org.reprap.devices.GenericExtruder

getExtruderSpeed() - Method in interface org.reprap.Extruder

getExtruderSpeed() - Method in class org.reprap.gui.botConsole.GenericExtruderTabPanel

getExtruderState() - Method in class org.reprap.devices.GenericExtruder

Find out how far we have extruded so far

getExtruderState() - Method in interface org.reprap.Extruder

Find out how far we have extruded so far

getExtrusionBroadWidth() - Method in class org.reprap.devices.GenericExtruder

getExtrusionBroadWidth() - Method in interface org.reprap.Extruder

getExtrusionDelayForLayer() - Method in class org.reprap.devices.GenericExtruder

Gets the number of milliseconds to wait before starting a border track

getExtrusionDelayForLayer() - Method in interface org.reprap.Extruder

Gets the number of milliseconds to wait before starting the extrude motor for the first track of a layer

getExtrusionDelayForPolygon() - Method in class org.reprap.devices.GenericExtruder

Gets the number of milliseconds to wait before starting a hatch track

getExtrusionDelayForPolygon() - Method in interface org.reprap.Extruder

Gets the number of milliseconds to wait before starting the extrude motor for any other track

getExtrusionFoundationWidth() - Method in class org.reprap.devices.GenericExtruder

getExtrusionFoundationWidth() - Method in interface org.reprap.Extruder

getExtrusionHeight() - Method in class org.reprap.devices.GenericExtruder

getExtrusionHeight() - Method in interface org.reprap.Extruder

getExtrusionInfillWidth() - Method in class org.reprap.devices.GenericExtruder

At the top and bottom return the fine width; in between return the braod one.

getExtrusionInfillWidth() - Method in interface org.reprap.Extruder

getExtrusionOverRun() - Method in class org.reprap.devices.GenericExtruder

getExtrusionOverRun() - Method in interface org.reprap.Extruder

getExtrusionReverseDelay() - Method in class org.reprap.devices.GenericExtruder

Gets the number of milliseconds to reverse the extrude motor at the end of a track

getExtrusionReverseDelay() - Method in interface org.reprap.Extruder

Gets the number of milliseconds to reverse the extrude motor at the end of a track

getExtrusionSize() - Method in class org.reprap.devices.GenericExtruder

getExtrusionSize() - Method in interface org.reprap.Extruder

getFastEFeedrate() - Method in class org.reprap.devices.GenericExtruder

getFastEFeedrate() - Method in interface org.reprap.Extruder

The fastest we can extrude in mm/min

getFastFeedrateZ() - Method in class org.reprap.machines.GenericRepRap

getFastFeedrateZ() - Method in interface org.reprap.Printer

getFastXYFeedrate() - Method in class org.reprap.devices.GenericExtruder

getFastXYFeedrate() - Method in interface org.reprap.Extruder

The speed of X and Y movement

getFastXYFeedrate() - Method in class org.reprap.machines.GenericRepRap

getFastXYFeedrate() - Method in interface org.reprap.Printer

getFeedrate() - Method in class org.reprap.machines.GenericRepRap

getFinishX() - Method in class org.reprap.machines.GenericRepRap

The XY location to go to at the end of a build

getFinishX() - Method in interface org.reprap.Printer

The location to go to at the end

getFinishY() - Method in class org.reprap.machines.GenericRepRap

getFinishY() - Method in interface org.reprap.Printer

getFirstLocale() - Method in class org.reprap.gui.Panel3D

getFoundationLayers() - Method in class org.reprap.geometry.LayerRules

getFoundationLayers() - Method in class org.reprap.machines.GenericRepRap

getFoundationLayers() - Method in interface org.reprap.Printer

How many layers of foundation to build

getFrontClipDistance() - Method in class org.reprap.gui.Panel3D

getGenericExtruderTabPanel(int) - Static method in class org.reprap.gui.botConsole.BotConsoleFrame

getGlobalPreferences() - Static method in class org.reprap.Preferences

getHatchDirection(Extruder) - Method in class org.reprap.geometry.LayerRules

The hatch pattern is: Foundation: X and Y rectangle Model: Alternate even then odd (which can be set to the same angle if wanted).

getHatchWidth(Extruder) - Method in class org.reprap.geometry.LayerRules

The gap in the layer zig-zag is: Foundation: The foundation width for all but...

getHeat() - Method in class org.reprap.devices.SNAPExtruder.RequestTemperatureResponse

getID() - Method in class org.reprap.devices.GenericExtruder

Each logical extruder has a unique ID

getID() - Method in interface org.reprap.Extruder

Each logical extruder has a unique ID

getIndex(Variable) - Method in class org.reprap.utilities.BooleanExpression

getInfillExtruder() - Method in class org.reprap.devices.GenericExtruder

getInfillExtruder() - Method in interface org.reprap.Extruder

getInfillExtruderNumber() - Method in class org.reprap.devices.GenericExtruder

getInfillExtruderNumber() - Method in interface org.reprap.Extruder

getInfillFeedrate() - Method in class org.reprap.devices.GenericExtruder

getInfillFeedrate() - Method in interface org.reprap.Extruder

getInfillMaterial() - Method in class org.reprap.devices.GenericExtruder

What stuff are we infilling with?

getInfillMaterial() - Method in interface org.reprap.Extruder

What stuff are we infilling with?

getInfillOverlap() - Method in class org.reprap.devices.GenericExtruder

Number of mm to overlap the hatching infill with the outline.

getInfillOverlap() - Method in interface org.reprap.Extruder

Number of mm to overlap the hatching infill with the outline.

getInfillSpeedFactor() - Method in class org.reprap.devices.GenericExtruder

The the outline speed and the infill speed [0,1]

getInfillSpeedFactor() - Method in interface org.reprap.Extruder

getLastFoundationWidth(LayerRules) - Method in class org.reprap.devices.GenericExtruder

getLayer() - Method in class org.reprap.geometry.Producer

getLayer() - Method in class org.reprap.Main

getLayers() - Method in class org.reprap.geometry.Producer

getLayers() - Method in class org.reprap.Main

getLayingSupport() - Method in class org.reprap.geometry.LayerRules

getLowerFineLayers() - Method in class org.reprap.devices.GenericExtruder

getLowerFineLayers() - Method in interface org.reprap.Extruder

getMachineLayer() - Method in class org.reprap.geometry.LayerRules

getMachineLayerMax() - Method in class org.reprap.geometry.LayerRules

getMachineZ() - Method in class org.reprap.geometry.LayerRules

getMachineZMAx() - Method in class org.reprap.geometry.LayerRules

getMaterial() - Method in class org.reprap.Attributes

getMaterial() - Method in class org.reprap.devices.GenericExtruder

What stuff are we working with?

getMaterial() - Method in interface org.reprap.Extruder

What stuff are we working with?

getMaxAcceleration() - Method in class org.reprap.devices.GenericExtruder

getMaxAcceleration() - Method in interface org.reprap.Extruder

getMaxFeedrateZ() - Method in class org.reprap.machines.GenericRepRap

getMaxXYAcceleration() - Method in class org.reprap.machines.GenericRepRap

getMaxXYAcceleration() - Method in interface org.reprap.Printer

getMaxZAcceleration() - Method in class org.reprap.machines.GenericRepRap

getMaxZAcceleration() - Method in interface org.reprap.Printer

getMiddleStart() - Method in class org.reprap.devices.GenericExtruder

If this is true, plot outlines from the middle of their infilling hatch to reduce dribble at their starts and ends.

getMiddleStart() - Method in interface org.reprap.Extruder

If this is true, plot outlines from the middle of their infilling hatch to reduce dribble at their starts and ends.

getMinLiftedZ() - Method in class org.reprap.devices.GenericExtruder

The smallest allowable free-movement height above the base

getMinLiftedZ() - Method in interface org.reprap.Extruder

The smallest allowable free-movement height above the base

getModelLayer() - Method in class org.reprap.geometry.LayerRules

getModelLayerMax() - Method in class org.reprap.geometry.LayerRules

getModelZ() - Method in class org.reprap.geometry.LayerRules

getModelZ(int) - Method in class org.reprap.geometry.LayerRules

getModelZMAx() - Method in class org.reprap.geometry.LayerRules

getNextOne(STLObject) - Method in class org.reprap.geometry.polygons.AllSTLsToBuild

Find an object in the list and return the next one.

getNextPolygon(ArrayList<AllSTLsToBuild.LineSegment>) - Method in class org.reprap.geometry.polygons.AllSTLsToBuild

Stitch together the some of the edges to form a polygon.

getNozzleClearTime() - Method in class org.reprap.devices.GenericExtruder

getNozzleClearTime() - Method in interface org.reprap.Extruder

getNozzleWaitTime() - Method in class org.reprap.devices.GenericExtruder

getNozzleWaitTime() - Method in interface org.reprap.Extruder

getNozzleWipeDatumX() - Method in class org.reprap.devices.GenericExtruder

getNozzleWipeDatumX() - Method in interface org.reprap.Extruder

getNozzleWipeDatumY() - Method in class org.reprap.devices.GenericExtruder

getNozzleWipeDatumY() - Method in interface org.reprap.Extruder

getNozzleWipeEnabled() - Method in class org.reprap.devices.GenericExtruder

getNozzleWipeEnabled() - Method in interface org.reprap.Extruder

getNozzleWipeFreq() - Method in class org.reprap.devices.GenericExtruder

getNozzleWipeFreq() - Method in interface org.reprap.Extruder

getNozzleWipeStrokeX() - Method in class org.reprap.devices.GenericExtruder

getNozzleWipeStrokeX() - Method in interface org.reprap.Extruder

getNozzleWipeStrokeY() - Method in class org.reprap.devices.GenericExtruder

getNozzleWipeStrokeY() - Method in interface org.reprap.Extruder

getNullAddress() - Method in interface org.reprap.comms.Address

getNumberFromMaterial(String) - Static method in class org.reprap.devices.GenericExtruder

What are the dimensions for infill?

getObject() - Method in class org.reprap.gui.PreferencesValue

getObjectColour() - Method in class org.reprap.gui.Panel3D

getOddHatchDirection() - Method in class org.reprap.devices.GenericExtruder

The direction to hatch odd-numbered layers in degrees anticlockwise from the X axis

getOddHatchDirection() - Method in interface org.reprap.Extruder

The direction to hatch odd-numbered layers in degrees anticlockwise from the X axis

getOffsets(BranchGroup, Vector3d) - Method in class org.reprap.gui.STLObject

Find how to move the object by actually changing all its coordinates (i.e.

getOffsetX() - Method in class org.reprap.devices.GenericExtruder

getOffsetX() - Method in interface org.reprap.Extruder

getOffsetY() - Method in class org.reprap.devices.GenericExtruder

getOffsetY() - Method in interface org.reprap.Extruder

getOffsetZ() - Method in class org.reprap.devices.GenericExtruder

getOffsetZ() - Method in interface org.reprap.Extruder

getOutlineFeedrate() - Method in class org.reprap.devices.GenericExtruder

getOutlineFeedrate() - Method in interface org.reprap.Extruder

getOutlineSpeedFactor() - Method in class org.reprap.devices.GenericExtruder

getOutlineSpeedFactor() - Method in interface org.reprap.Extruder

getParent() - Method in class org.reprap.Attributes

getParent() - Method in class org.reprap.geometry.polygons.treeList

Get the parent

getPart() - Method in class org.reprap.Attributes

getPauseBetweenSegments() - Method in class org.reprap.devices.GenericExtruder

Stop the extrude motor between segments?

getPauseBetweenSegments() - Method in interface org.reprap.Extruder

Stop the extrude motor between segments?

getPayload() - Method in class org.reprap.comms.IncomingMessage

getPhysicalExtruderNumber() - Method in class org.reprap.devices.GenericExtruder

Several logical extruders can share one physical extruder This number is unique to each physical extruder

getPhysicalExtruderNumber() - Method in interface org.reprap.Extruder

Several logical extruders can share one physical extruder This number is unique to each physical extruder

getPosition() - Method in interface org.reprap.AxisMotor

getPosition() - Method in class org.reprap.devices.GCodeStepperMotor

getPosition() - Method in class org.reprap.devices.NullStepperMotor

getPosition() - Method in class org.reprap.devices.SNAPStepperMotor

getPosition() - Method in class org.reprap.gui.botConsole.BotConsoleFrame

getPrinter() - Method in class org.reprap.Device

getPrinter() - Method in class org.reprap.devices.GenericExtruder

getPrinter() - Method in class org.reprap.devices.GenericStepperMotor

getPrinter() - Method in interface org.reprap.Extruder

getPrinter() - Method in class org.reprap.geometry.LayerRules

getPrinter() - Method in class org.reprap.gui.botConsole.XYZTabPanel

getPrinter() - Method in class org.reprap.Main

Return the printer being used

getPrintTabFrame() - Static method in class org.reprap.gui.botConsole.BotConsoleFrame

getProbsFolderPath() - Static method in class org.reprap.Preferences

getPropsFile() - Static method in class org.reprap.Preferences

getPurgeTime() - Method in class org.reprap.devices.GenericExtruder

Time to purge the extruder -ve values supress

getPurgeTime() - Method in interface org.reprap.Extruder

Time to purge the extruder -ve values supress

getPWM() - Method in class org.reprap.devices.GenericExtruder

Return the PWM for the motor.

getPWM() - Method in interface org.reprap.Extruder

For stepper extruders, return the PWM to use to drive them in [0, 1] Negative values returned mean this feature is disabled.

getRange(int) - Method in interface org.reprap.AxisMotor

getRange(int) - Method in class org.reprap.devices.GCodeStepperMotor

getRange(int) - Method in class org.reprap.devices.NullStepperMotor

getRange(int) - Method in class org.reprap.devices.SNAPStepperMotor

getRange() - Method in class org.reprap.devices.SNAPStepperMotor.RequestRangeResponse

getRegularExtruderSpeed() - Method in class org.reprap.devices.GenericExtruder

getReplyContext(Communicator, Device) - Method in class org.reprap.comms.OutgoingMessage

Return an IncomingContext for a message in response to this message.

getResourceMessage(Producer) - Method in class org.reprap.Main

getResult() - Method in class org.reprap.gui.ContinuationMesage

getReturnedCoordinate(String, String) - Method in class org.reprap.machines.GCodeRepRap

Pick out a coordinate from the returned string

getReversing() - Method in class org.reprap.devices.GenericExtruder

Find out if we are currently in reverse

getReversing() - Method in interface org.reprap.Extruder

Find out if we are currently in reverse

getScale() - Method in class org.reprap.gui.Panel3D

getSeparationFraction() - Method in class org.reprap.devices.GenericExtruder

At the support layer before a layer is to be separated, how far up the normal Z movement do we go to make a bigger gap to form a weak join?

getSeparationFraction() - Method in interface org.reprap.Extruder

At the support layer before a layer is to be separated, how far up the normal Z movement do we go to make a bigger gap to form a weak join?

getSeparationSpeed() - Method in class org.reprap.devices.GenericExtruder

getShells() - Method in class org.reprap.devices.GenericExtruder

The number of times to go round the outline (0 to supress)

getShells() - Method in interface org.reprap.Extruder

The number of times to go round the outline (0 to supress)

getShortLength() - Method in class org.reprap.devices.GenericExtruder

get short lengths which need to be plotted faster set -ve to turn this off.

getShortLength() - Method in interface org.reprap.Extruder

get short lengths which need to be plotted faster set -ve to turn this off.

getShortLineFeedrate() - Method in class org.reprap.devices.GenericExtruder

Feedrate for short lines in mm/minute

getShortLineFeedrate() - Method in interface org.reprap.Extruder

Feedrate for short lines in mm/minute

getShortLineSpeedFactor() - Method in class org.reprap.devices.GenericExtruder

Factor (between 0 and 1) to use to set the speed for short lines.

getShortLineSpeedFactor() - Method in interface org.reprap.Extruder

Factor (between 0 and 1) to use to set the speed for short lines.

getSlice(int, int) - Method in class org.reprap.geometry.polygons.AllSTLsToBuild.SliceCache

getSlowXYFeedrate() - Method in class org.reprap.devices.GenericExtruder

getSlowXYFeedrate() - Method in interface org.reprap.Extruder

getSlowXYFeedrate() - Method in class org.reprap.machines.GenericRepRap

getSlowXYFeedrate() - Method in interface org.reprap.Printer

getSlowZFeedrate() - Method in class org.reprap.machines.GenericRepRap

getSlowZFeedrate() - Method in interface org.reprap.Printer

getStatus() - Method in class org.reprap.devices.SNAPStepperMotor

getSTL() - Method in class org.reprap.gui.STLObject

getStlBackground() - Method in class org.reprap.gui.Panel3D

getSTLs() - Method in class org.reprap.gui.RepRapBuild

getSupport(int, int) - Method in class org.reprap.geometry.polygons.AllSTLsToBuild.SliceCache

getSupportExtruder() - Method in class org.reprap.devices.GenericExtruder

getSupportExtruder() - Method in interface org.reprap.Extruder

getSupportExtruderNumber() - Method in class org.reprap.devices.GenericExtruder

getSupportExtruderNumber() - Method in interface org.reprap.Extruder

getSupportMaterial() - Method in class org.reprap.devices.GenericExtruder

What stuff are we holding up with?

getSupportMaterial() - Method in interface org.reprap.Extruder

What stuff are we supporting with?

getTargetPositionInMM() - Method in class org.reprap.gui.botConsole.StepperPositionJPanel

getTemperature() - Method in class org.reprap.devices.GCodeExtruder

getTemperature() - Method in class org.reprap.devices.NullExtruder

getTemperature() - Method in class org.reprap.devices.SNAPExtruder

getTemperature() - Method in interface org.reprap.Extruder

getTemperatureTarget() - Method in class org.reprap.devices.GenericExtruder

getTemperatureTarget() - Method in interface org.reprap.Extruder

getText() - Method in class org.reprap.gui.PreferencesValue.BooleanChoice

getText() - Method in class org.reprap.gui.PreferencesValue

getTheRingLocationForRead(int) - Method in class org.reprap.geometry.polygons.AllSTLsToBuild.SliceCache

getTheRingLocationForWrite(int) - Method in class org.reprap.geometry.polygons.AllSTLsToBuild.SliceCache

getTopDown() - Method in class org.reprap.geometry.LayerRules

getTopDown() - Method in class org.reprap.machines.GenericRepRap

getTopDown() - Method in interface org.reprap.Printer

getTotalDistanceExtruded() - Method in class org.reprap.geometry.Producer

getTotalDistanceExtruded() - Method in class org.reprap.machines.GenericRepRap

getTotalDistanceExtruded() - Method in interface org.reprap.Printer

Get the total distance moved while extruding

getTotalDistanceMoved() - Method in class org.reprap.geometry.Producer

The total distance moved is the total distance extruded plus plus additional movements of the extruder when no materials was deposited

getTotalDistanceMoved() - Method in class org.reprap.machines.GenericRepRap

getTotalDistanceMoved() - Method in interface org.reprap.Printer

Get the total distance moved (whether extruding or not)

getTotalElapsedTime() - Method in class org.reprap.geometry.Producer

getTotalElapsedTime() - Method in class org.reprap.machines.GenericRepRap

getTotalElapsedTime() - Method in interface org.reprap.Printer

getTotalVolumeExtruded() - Method in class org.reprap.geometry.Producer

TODO: This figure needs to get added up as we go along to allow for different extruders

getTransform(Transform3D) - Method in class org.reprap.gui.MouseObject

getTransform() - Method in class org.reprap.gui.STLObject

getUnique() - Method in class org.reprap.gui.STLObject.Contents

getUnique(int) - Method in class org.reprap.gui.STLObject

getUpperFineLayers() - Method in class org.reprap.devices.GenericExtruder

getUpperFineLayers() - Method in interface org.reprap.Extruder

getValue() - Method in class org.reprap.comms.messages.IncomingIntMessage

getValue() - Method in class org.reprap.devices.SNAPExtruder.RequestIsEmptyResponse

getValveDelayForLayer() - Method in class org.reprap.devices.GenericExtruder

Gets the number of milliseconds to wait before opening the valve for the first track of a layer

getValveDelayForLayer() - Method in interface org.reprap.Extruder

Gets the number of milliseconds to wait before opening the valve for the first track of a layer

getValveDelayForPolygon() - Method in class org.reprap.devices.GenericExtruder

Gets the number of milliseconds to wait before opening the valve for any other track

getValveDelayForPolygon() - Method in interface org.reprap.Extruder

Gets the number of milliseconds to wait before opening the valve for any other track

getValveOverRun() - Method in class org.reprap.devices.GenericExtruder

getValveOverRun() - Method in interface org.reprap.Extruder

getVariables() - Method in class org.reprap.utilities.BooleanExpression

getVersion() - Method in class org.reprap.comms.messages.VersionResponseMessage

getVersion() - Method in class org.reprap.devices.SNAPExtruder

getVersion() - Method in class org.reprap.devices.SNAPStepperMotor

getViewPlatformActivationRadius() - Method in class org.reprap.gui.Panel3D

getViewTransformGroupArray() - Method in class org.reprap.gui.Panel3D

getVirtualUniverse() - Method in class org.reprap.gui.Panel3D

getWebPage - Variable in class org.reprap.gui.botConsole.PrintTabFrame

getWebPageActionPerformed(ActionEvent) - Method in class org.reprap.gui.botConsole.PrintTabFrame

getWorkingDirectory() - Static method in class org.reprap.gui.Panel3D

getX() - Method in class org.reprap.machines.GenericRepRap

getX() - Method in interface org.reprap.Printer

getXMotor() - Method in class org.reprap.machines.GenericRepRap

getXMotor() - Method in interface org.reprap.Printer

Get the X stepper

getXStepsPerMM() - Method in class org.reprap.machines.GenericRepRap

getXStepsPerMM() - Method in interface org.reprap.Printer

The X discretisation

getXYZTabPanel() - Static method in class org.reprap.gui.botConsole.BotConsoleFrame

getY() - Method in class org.reprap.machines.GenericRepRap

getY() - Method in interface org.reprap.Printer

getYMotor() - Method in class org.reprap.machines.GenericRepRap

getYMotor() - Method in interface org.reprap.Printer

Get the Y stepper

getYStepsPerMM() - Method in class org.reprap.machines.GenericRepRap

getYStepsPerMM() - Method in interface org.reprap.Printer

The Y discretisation

getZ() - Method in class org.reprap.machines.GenericRepRap

getZ() - Method in interface org.reprap.Printer

getZMotor() - Method in class org.reprap.machines.GenericRepRap

getZMotor() - Method in interface org.reprap.Printer

Get the Z stepper

getZStep() - Method in class org.reprap.geometry.LayerRules

getZStepsPerMM() - Method in class org.reprap.machines.GenericRepRap

getZStepsPerMM() - Method in interface org.reprap.Printer

The Z discretisation

GLoadOK - Variable in class org.reprap.gui.botConsole.PrintTabFrame

globalCats - Variable in class org.reprap.gui.Preferences

globalPrefs - Static variable in class org.reprap.Preferences

globals - Variable in class org.reprap.gui.Preferences

globalValues - Variable in class org.reprap.gui.Preferences

goButton - Variable in class org.reprap.gui.botConsole.XYZTabPanel

goButtonActionPerformed(ActionEvent) - Method in class org.reprap.gui.botConsole.XYZTabPanel

goTo(double, double, double) - Method in class org.reprap.gui.botConsole.XYZTabPanel

goToPlane(BooleanGrid.iPoint, List<RrHalfPlane>, int, int) - Method in class org.reprap.geometry.polygons.BooleanGrid

Find the bit of polygon edge between start/originPlane and targetPlane TODO: origin == target!!!

goToPoint(BooleanGrid.iPoint, BooleanGrid.iPoint, RrHalfPlane, double) - Method in class org.reprap.geometry.polygons.BooleanGrid

Find the piece of edge between start and end (if there is one).

gradient() - Method in class org.reprap.geometry.polygons.Rr2Point

Gradient

grid - Static variable in class org.reprap.Preferences

grid() - Static method in class org.reprap.Preferences

gridRes - Static variable in class org.reprap.Preferences

gridRes() - Static method in class org.reprap.Preferences

gui - Static variable in class org.reprap.Main