A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

A

a - Variable in class org.reprap.geometry.polygons.AllSTLsToBuild.LineSegment
The ends of the line segment
a(String) - Static method in class org.reprap.utilities.Debug
Just print a message anytime
a1 - Variable in class org.reprap.gui.botConsole.bedPanel
 
a2 - Variable in class org.reprap.gui.botConsole.bedPanel
 
abandon - Variable in class org.reprap.geometry.segmentSpeeds
 
abs() - Method in class org.reprap.geometry.polygons.BooleanGrid.iPoint
Absolute value
abs() - Method in class org.reprap.geometry.polygons.RrInterval
Absolute value of an interval
absoluteZero - Static variable in class org.reprap.Preferences
 
absoluteZero() - Static method in class org.reprap.Preferences
 
absZero - Static variable in class org.reprap.devices.GenericExtruder
Offset of 0 degrees centigrade from absolute zero
accept(File) - Method in class org.reprap.utilities.ExtensionFileFilter
 
accRange(double, double, double) - Method in class org.reprap.geometry.polygons.RrPolygon
 
aDatum - Variable in class org.reprap.gui.botConsole.bedPanel
 
add(double) - Method in class org.reprap.devices.ExtruderState
 
add(STLObject) - Method in class org.reprap.geometry.polygons.AllSTLsToBuild
Add a new STLObject
add(AllSTLsToBuild) - Method in class org.reprap.geometry.polygons.AllSTLsToBuild
Add a new collection
add(BooleanGrid.iPoint) - Method in class org.reprap.geometry.polygons.BooleanGrid.iPoint
Vector addition
add(BooleanGrid.iPoint) - Method in class org.reprap.geometry.polygons.BooleanGrid.iPolygon
Add a new point on the end
add(BooleanGrid.iPolygon) - Method in class org.reprap.geometry.polygons.BooleanGrid.iPolygon
Add a whole polygon on the end
add(BooleanGrid.iPolygon) - Method in class org.reprap.geometry.polygons.BooleanGrid.iPolygonList
Add a polygon on the end
add(BooleanGrid.iPolygonList) - Method in class org.reprap.geometry.polygons.BooleanGrid.iPolygonList
Add another list of polygons on the end
add(BooleanGrid) - Method in class org.reprap.geometry.polygons.BooleanGridList
Add a shape on the end
add(BooleanGridList) - Method in class org.reprap.geometry.polygons.BooleanGridList
Add another list of shapes on the end
add(Rr2Point, Rr2Point) - Static method in class org.reprap.geometry.polygons.Rr2Point
 
add(RrInterval, RrInterval) - Static method in class org.reprap.geometry.polygons.RrInterval
Interval addition
add(RrInterval, double) - Static method in class org.reprap.geometry.polygons.RrInterval
 
add(double, RrInterval) - Static method in class org.reprap.geometry.polygons.RrInterval
 
add(Rr2Point) - Method in class org.reprap.geometry.polygons.RrLine
Move the origin
add(Rr2Point) - Method in class org.reprap.geometry.polygons.RrPolygon
Add a new point to the polygon
add(int, Rr2Point) - Method in class org.reprap.geometry.polygons.RrPolygon
Insert a new point into the polygon
add(int, Rr2Point, double) - Method in class org.reprap.geometry.polygons.RrPolygon
Insert a new point and speed into the polygon
add(RrPolygon) - Method in class org.reprap.geometry.polygons.RrPolygon
Put a new polygon on the end (N.B.
add(RrPolygonList) - Method in class org.reprap.geometry.polygons.RrPolygonList
Put a new list on the end
add(RrPolygon) - Method in class org.reprap.geometry.polygons.RrPolygonList
Add one new polygon to the list
add(int, RrPolygon) - Method in class org.reprap.geometry.polygons.RrPolygonList
Add one new polygon to the list at location i
add(Vector3d, Vector3d) - Static method in class org.reprap.gui.STLObject
 
add(File) - Method in class org.reprap.utilities.RrDeleteOnExit
 
add(RrPolygonList) - Method in class org.reprap.utilities.RrGraphics
 
add(BooleanGrid) - Method in class org.reprap.utilities.RrGraphics
 
addAllEdges(Shape3D, Transform3D, double, Attributes, ArrayList<AllSTLsToBuild.LineSegment>[]) - Method in class org.reprap.geometry.polygons.AllSTLsToBuild
Run through a Shape3D and set edges from it at plane z Apply the transform first
addCanvas3D(Canvas3D) - Method in class org.reprap.gui.Panel3D
 
addCanvas3D(Canvas3D) - Method in class org.reprap.gui.RepRapBuild
 
addChild(treeList) - Method in class org.reprap.geometry.polygons.treeList
Add a polygon as a child of this one
addEdge(Point3d, Point3d, Point3d, double, Attributes, ArrayList<AllSTLsToBuild.LineSegment>[]) - Method in class org.reprap.geometry.polygons.AllSTLsToBuild
Add the edge where the plane z cuts the triangle (p, q, r) (if it does).
addExtrudedLength(double) - Method in class org.reprap.devices.GenericExtruder
Add some extruded length
addExtruderPanels() - Method in class org.reprap.gui.botConsole.BotConsoleFrame
 
Address - Interface in org.reprap.comms
Interface that handles some of the Address
address - Variable in class org.reprap.Device
Adress of the device.
addRFOFile(String) - Method in class org.reprap.gui.RepRapBuild
 
addRow(Variable[], boolean) - Method in class org.reprap.utilities.FunctionTable
Add a new row to the function table
addSTL(String, Vector3d, Appearance, STLObject) - Method in class org.reprap.gui.STLObject
Load an STL object from a file with a known offset (set that null to put the object bottom-left-at-origin) and set its appearance
addSTLFileForMaking() - Method in class org.reprap.machines.GenericRepRap
Load an STL file to be made.
addSTLFileForMaking() - Method in interface org.reprap.Printer
Load a file to be made.
addToStep - Variable in class org.reprap.geometry.LayerRules
If we take a short step, remember it and add it on next time
addValueToPanel(PreferencesValue, JPanel) - Method in class org.reprap.gui.Preferences
 
addViewBranchGroup(Locale, BranchGroup) - Method in class org.reprap.gui.Panel3D
 
all() - Method in class org.reprap.utilities.TableRow
 
allCases4(Variable[]) - Static method in class org.reprap.utilities.CodeGenerator
 
allFalse - Variable in class org.reprap.utilities.FunctionTable
 
allMaterials() - Static method in class org.reprap.Preferences
 
allOnes() - Method in class org.reprap.utilities.FunctionTable
 
allPerimiters(Attributes) - Method in class org.reprap.geometry.polygons.BooleanGrid
Return all the outlines of all the solid areas as real-world polygons with attributes a
allPoints() - Method in class org.reprap.geometry.polygons.RrPolygon
Construct a list of all the points in the polygon
allPolygons - Variable in class org.reprap.geometry.LayerProducer
The polygons to infill
allSTLs - Variable in class org.reprap.geometry.Producer
 
AllSTLsToBuild - Class in org.reprap.geometry.polygons
This class holds a list of STLObjects that represents everything that is to be built.
AllSTLsToBuild() - Constructor for class org.reprap.geometry.polygons.AllSTLsToBuild
Simple constructor
AllSTLsToBuild.BoundingBox - Class in org.reprap.geometry.polygons
3D bounding box
AllSTLsToBuild.BoundingBox(Point3d) - Constructor for class org.reprap.geometry.polygons.AllSTLsToBuild.BoundingBox
 
AllSTLsToBuild.BoundingBox(AllSTLsToBuild.BoundingBox) - Constructor for class org.reprap.geometry.polygons.AllSTLsToBuild.BoundingBox
 
AllSTLsToBuild.LineSegment - Class in org.reprap.geometry.polygons
Line segment consisting of two points.
AllSTLsToBuild.LineSegment(Rr2Point, Rr2Point, Attributes) - Constructor for class org.reprap.geometry.polygons.AllSTLsToBuild.LineSegment
Constructor takes two intersection points with an STL triangle edge.
AllSTLsToBuild.SliceCache - Class in org.reprap.geometry.polygons
Ring buffer cache to hold previously computed slices for doing infill and support material calculations.
AllSTLsToBuild.SliceCache() - Constructor for class org.reprap.geometry.polygons.AllSTLsToBuild.SliceCache
 
allTrue - Variable in class org.reprap.utilities.FunctionTable
 
allZeros() - Method in class org.reprap.utilities.FunctionTable
 
alreadyReversed - Variable in class org.reprap.comms.GCodeReaderAndWriter
Not quite sure why this is needed...
angleSpeed(int, double, double) - Method in class org.reprap.devices.pseudo.LinePrinter
Correct the speed for the angle of the line to the axes
anotherSTLFile(String) - Method in class org.reprap.gui.RepRapBuild
 
app - Variable in class org.reprap.Attributes
The appearance (colour) in the loading and simulation windows
applicationBounds - Variable in class org.reprap.gui.Panel3D
 
arcCompensate() - Method in class org.reprap.geometry.polygons.RrPolygon
Offset (some of) the points in the polygon to allow for the fact that extruded circles otherwise don't come out right.
arcCompensate() - Method in class org.reprap.geometry.polygons.RrPolygonList
Offset (some of) the points in the polygons to allow for the fact that extruded circles otherwise don't come out right.
arcCompensationFactor - Variable in class org.reprap.devices.GenericExtruder
 
arcShortSides - Variable in class org.reprap.devices.GenericExtruder
 
area() - Method in class org.reprap.geometry.polygons.RrPolygon
Signed area (-ve result means polygon goes anti-clockwise)
asFactor - Variable in class org.reprap.devices.GenericExtruder
Factor by which to speed up round corners
asLength - Variable in class org.reprap.devices.GenericExtruder
Length (mm) to speed up round corners
astl - Variable in class org.reprap.RFO
The collection of objects being written out or read in.
att - Variable in class org.reprap.geometry.polygons.AllSTLsToBuild.LineSegment
The attribute (i.e.
att - Variable in class org.reprap.geometry.polygons.BooleanGrid
The attributes
att - Variable in class org.reprap.geometry.polygons.RrPolygon
The atributes of the STL object that this polygon represents
att - Static variable in class org.reprap.gui.MaterialRadioButtons
 
att - Variable in class org.reprap.gui.STLObject.Contents
 
attribute() - Method in class org.reprap.geometry.polygons.BooleanGrid
Return the attributes
attribute(int) - Method in class org.reprap.geometry.polygons.BooleanGridList
Return the ith attribute
Attributes - Class in org.reprap
Small class to hold RepRap attributes that are attached to Java3D shapes as user data, primarily to record the material that things are made from.
Attributes(String, STLObject, BranchGroup, Appearance) - Constructor for class org.reprap.Attributes
Constructor - it is permissible to set any argument null.
attributes(int) - Method in class org.reprap.gui.STLObject
 
awaitSensorsInitialised() - Method in class org.reprap.devices.SNAPExtruder
 
axis - Variable in class org.reprap.devices.GenericStepperMotor
Useful to know what we're called
axis - Variable in class org.reprap.gui.botConsole.StepperPositionJPanel
 
axisLabel - Variable in class org.reprap.gui.botConsole.StepperPositionJPanel
 
axisLength - Variable in class org.reprap.gui.botConsole.StepperPositionJPanel
 
AxisMotor - Interface in org.reprap
 
AxisMotor.Range - Class in org.reprap
 
AxisMotor.Range() - Constructor for class org.reprap.AxisMotor.Range
 

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z