A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

M

machineColour - Variable in class org.reprap.gui.Panel3D

MachineFactory - Class in org.reprap.machines

Returns an appropriate Printer object based on the current properties

MachineFactory() - Constructor for class org.reprap.machines.MachineFactory

machineLayer - Variable in class org.reprap.geometry.LayerRules

The number of layers the machine has done

machineLayerMax - Variable in class org.reprap.geometry.LayerRules

The number of the last machine layer (first = 0)

machineResolution - Static variable in class org.reprap.Preferences

machineResolution() - Static method in class org.reprap.Preferences

machineWait(double, boolean) - Method in class org.reprap.machines.GCodeRepRap

All machine dwells and delays are routed via this function, rather than calling Thread.sleep - this allows them to generate the right G codes (G4) etc.

machineWait(double, boolean) - Method in class org.reprap.machines.Simulator

All machine dwells and delays are routed via this function, rather than calling Thread.sleep - this allows them to generate the right G codes (G4) etc.

machineWait(double, boolean) - Method in interface org.reprap.Printer

All machine dwells and delays are routed via this function, rather than calling Thread.sleep - this allows them to generate the right G codes (G4) etc.

machineZ - Variable in class org.reprap.geometry.LayerRules

How far we are up from machine Z=0

machineZMax - Variable in class org.reprap.geometry.LayerRules

The highest the machine should go this build

magBox(RrRectangle, int, int) - Method in class org.reprap.utilities.RrGraphics.myMouse

magnitude2() - Method in class org.reprap.geometry.polygons.BooleanGrid.iPoint

Squared length

main(String[]) - Static method in class org.reprap.gui.botConsole.BotConsoleFrame

main(String[]) - Static method in class org.reprap.gui.Preferences

main(String[]) - Static method in class org.reprap.gui.StatusMessage

Auto-generated main method to display this JDialog

Main - Class in org.reprap

mainpage RepRap Host Controller Software section overview Overview Please see http://reprap.org/ for more details.

Main() - Constructor for class org.reprap.Main

main(String[]) - Static method in class org.reprap.Main

main(String[]) - Static method in class org.reprap.utilities.CodeGenerator

main(String[]) - Static method in class org.reprap.utilities.FilterGenerator

mainFrame - Variable in class org.reprap.Main

mainPreferences - Variable in class org.reprap.Preferences

makeBoolean() - Method in class org.reprap.gui.PreferencesValue

makeFromSeveral(BooleanExpression[], int) - Method in class org.reprap.utilities.BooleanExpression

Make an expression from three or four atomic expressions in an array.

makeLabels(String[]) - Method in class org.reprap.gui.Preferences

Take an array of strings and turn them into labels (right justified).

makeValues(JLabel[]) - Method in class org.reprap.gui.Preferences

Take an array of labels and use their string values as keys to look up the corresponding values.

march - Variable in class org.reprap.geometry.polygons.BooleanGrid

marchAll() - Method in class org.reprap.geometry.polygons.BooleanGrid

Run marching squares round all polygons in the pattern, returning a list of them all

marchPattern(BooleanGrid.iPoint) - Method in class org.reprap.geometry.polygons.BooleanGrid

Calculate the 4-bit marching squares value for a point

marchRound(BooleanGrid.iPoint) - Method in class org.reprap.geometry.polygons.BooleanGrid

Run marching squares round the polygon starting with the 2x2 march pattern at start

material - Variable in class org.reprap.Attributes

The name of the material

material - Variable in class org.reprap.devices.GenericExtruder

The name of this extruder's material

material - Variable in class org.reprap.RFO.XMLIn

The name of the material (i.e.

materialColour - Variable in class org.reprap.devices.GenericExtruder

The colour of the material to use in the simulation windows

materialLabel - Variable in class org.reprap.gui.botConsole.GenericExtruderTabPanel

MaterialRadioButtons - Class in org.reprap.gui

Little class to put up a radiobutton menu so you can set what material something is to be made from.

MaterialRadioButtons() - Constructor for class org.reprap.gui.MaterialRadioButtons

max(RrInterval, RrInterval) - Static method in class org.reprap.geometry.polygons.RrInterval

Max

maxAcceleration - Variable in class org.reprap.devices.GenericExtruder

The fastest the machine can accelerate with this extruder

maxExtruderSpeed - Variable in class org.reprap.devices.GenericExtruder

Maximum motor speed (value between 0-255)

maxFeedrateZ - Variable in class org.reprap.machines.GenericRepRap

Maximum feedrate for Z axis

maximalVertex(RrLine) - Method in class org.reprap.geometry.polygons.RrPolygon

Find the index of the polygon point that has the maximal parametric projection onto a line.

maximum - Variable in class org.reprap.AxisMotor.Range

maxTorque - Variable in class org.reprap.devices.SNAPStepperMotor

Power output limiting (0-100 percent)

maxXYAcceleration - Variable in class org.reprap.machines.GenericRepRap

The fastest the machine can accelerate in X and Y

maxZ() - Method in class org.reprap.geometry.polygons.AllSTLsToBuild

Find the top of the highest object.

maxZAcceleration - Variable in class org.reprap.machines.GenericRepRap

The fastest the machine can accelerate in Z

maybeReZero() - Method in class org.reprap.machines.GenericRepRap

Occasionally re-zero X and Y if that option is selected (i.e.

mElements - Variable in class org.reprap.RFO.XMLIn

Transfom matrix to get an item in the right place.

message - Variable in class org.reprap.devices.SNAPExtruder.RequestSetHeat

message - Variable in class org.reprap.devices.SNAPStepperMotor.RequestDDAMaster

message - Variable in class org.reprap.devices.SNAPStepperMotor.RequestOneStep

message - Variable in class org.reprap.devices.SNAPStepperMotor.RequestQueue

message - Variable in class org.reprap.devices.SNAPStepperMotor.RequestSeekPosition

message - Variable in class org.reprap.devices.SNAPStepperMotor.RequestSetSpeed

message - Variable in class org.reprap.gui.ContinuationMesage

message - Variable in class org.reprap.gui.StatusMessage

messageType - Variable in class org.reprap.comms.messages.OutgoingAddressMessage

messageType - Variable in class org.reprap.comms.messages.OutgoingBlankMessage

messageType - Variable in class org.reprap.comms.messages.OutgoingByteMessage

messageType - Variable in class org.reprap.comms.messages.OutgoingIntMessage

mid - Variable in class org.reprap.devices.GenericStepperMotor

middleStart - Variable in class org.reprap.devices.GenericExtruder

middleStarts(RrPolygonList, LayerRules) - Method in class org.reprap.geometry.polygons.RrPolygonList

This assumes that the RrPolygonList for which it is called is all the outline polygons, and that hatching is their infill hatch.

midPoint(int, int) - Method in class org.reprap.geometry.polygons.PolPoint

min(RrInterval, RrInterval) - Static method in class org.reprap.geometry.polygons.RrInterval

Min

minimum - Variable in class org.reprap.AxisMotor.Range

minLiftedZ - Variable in class org.reprap.devices.GenericExtruder

The smallest allowable free-movement height above the base

mmLabel1 - Variable in class org.reprap.gui.botConsole.StepperPositionJPanel

mmLabel2 - Variable in class org.reprap.gui.botConsole.StepperPositionJPanel

mod() - Method in class org.reprap.geometry.polygons.Rr2Point

Modulus

modelLayer - Variable in class org.reprap.geometry.LayerRules

The count of layers up the model

modelLayerMax - Variable in class org.reprap.geometry.LayerRules

The number of the last model layer (first = 0)

modelZ - Variable in class org.reprap.geometry.LayerRules

How far up the model we are in mm

modelZMax - Variable in class org.reprap.geometry.LayerRules

The top of the model in model coordinates

modeQueue - Static variable in class org.reprap.devices.SNAPStepperMotor

What the firmware sends when the queue is active

moreCopies(STLObject, Attributes, int) - Method in class org.reprap.gui.RepRapBuild

motorID - Variable in class org.reprap.gui.botConsole.StepperPositionJPanel

motorReverseCheck - Variable in class org.reprap.gui.botConsole.GenericExtruderTabPanel

motorReverseCheckActionPerformed(ActionEvent) - Method in class org.reprap.gui.botConsole.GenericExtruderTabPanel

motorsPanel - Variable in class org.reprap.gui.botConsole.XYZTabPanel

motorSpeedField - Variable in class org.reprap.gui.botConsole.GenericExtruderTabPanel

motorStepsPerMM - Variable in class org.reprap.gui.botConsole.StepperPositionJPanel

motorX - Variable in class org.reprap.devices.pseudo.LinePrinter

Stepper motors

motorX - Variable in class org.reprap.machines.GenericRepRap

Stepper motors for the 3 axis

motorY - Variable in class org.reprap.devices.pseudo.LinePrinter

motorY - Variable in class org.reprap.machines.GenericRepRap

motorZ - Variable in class org.reprap.machines.GenericRepRap

mouse - Variable in class org.reprap.gui.RepRapBuild

mouse - Variable in class org.reprap.gui.STLObject

mouse_tf - Variable in class org.reprap.gui.Panel3D

mouse_zf - Variable in class org.reprap.gui.Panel3D

mouseClicked(MouseEvent) - Method in class org.reprap.gui.RepRapBuild

mouseClicked(MouseEvent) - Method in class org.reprap.utilities.RrGraphics.myMouse

mouseEntered(MouseEvent) - Method in class org.reprap.gui.RepRapBuild

mouseEntered(MouseEvent) - Method in class org.reprap.utilities.RrGraphics.myMouse

mouseExited(MouseEvent) - Method in class org.reprap.gui.RepRapBuild

mouseExited(MouseEvent) - Method in class org.reprap.utilities.RrGraphics.myMouse

MouseObject - Class in org.reprap.gui

MouseObject(Bounds, double, double) - Constructor for class org.reprap.gui.MouseObject

mousePressed() - Method in class org.reprap.gui.botConsole.bedPanel

mousePressed(MouseEvent) - Method in class org.reprap.gui.RepRapBuild

mousePressed(MouseEvent) - Method in class org.reprap.utilities.RrGraphics.myMouse

mouseReleased(MouseEvent) - Method in class org.reprap.gui.RepRapBuild

mouseReleased(MouseEvent) - Method in class org.reprap.utilities.RrGraphics.myMouse

mouseToWorld() - Method in class org.reprap.gui.RepRapBuild

mouseToWorld() - Method in class org.reprap.Main

move(Rr2Point, Rr2Point, boolean, boolean, boolean) - Method in class org.reprap.geometry.LayerProducer

move(STLObject, boolean) - Method in class org.reprap.gui.MouseObject

move(Rr2Point) - Method in class org.reprap.utilities.RrGraphics

Move invisibly to a point

moveTo(int, int, int, boolean, boolean) - Method in class org.reprap.devices.pseudo.LinePrinter

Move to a 2-space point in a direct line.

moveTo(double, double, double, double, boolean, boolean) - Method in class org.reprap.machines.GCodeRepRap

moveTo(double, double, double, double, boolean, boolean) - Method in class org.reprap.machines.GenericRepRap

moveTo(double, double, double, double, boolean, boolean) - Method in interface org.reprap.Printer

Move the printer carriage to the give x, y and z position while extruding material

moveToDumpButton - Variable in class org.reprap.gui.botConsole.GenericExtruderTabPanel

moveToDumpPointAction(ActionEvent) - Method in class org.reprap.gui.botConsole.GenericExtruderTabPanel

moveToFinish() - Method in class org.reprap.machines.GCodeRepRap

Go to the finish point

moveToPurge() - Method in class org.reprap.machines.GCodeRepRap

Go to the purge point

moveToPurge() - Method in class org.reprap.machines.Simulator

Go to the purge point

moveToPurge() - Method in interface org.reprap.Printer

Move to the purge point

moveToTarget() - Method in class org.reprap.gui.botConsole.StepperPositionJPanel

moveZAtStartOfLayer() - Method in class org.reprap.geometry.LayerRules

movingThing - Variable in class org.reprap.gui.MouseObject

MSG_Calibrate - Static variable in class org.reprap.devices.SNAPStepperMotor

Calibrate (?)

MSG_DDAMaster - Static variable in class org.reprap.devices.SNAPStepperMotor

DDAMaster ?

MSG_GetPosition - Static variable in class org.reprap.devices.SNAPStepperMotor

Get the current stepper motor position

MSG_GetRange - Static variable in class org.reprap.devices.SNAPStepperMotor

Get the range (?)

MSG_GetStatus - Static variable in class org.reprap.devices.SNAPStepperMotor

What's the thing up to?

MSG_GetTemp - Static variable in class org.reprap.devices.SNAPExtruder

Get the temperature of the extruder

MSG_GetVersion - Static variable in class org.reprap.comms.messages.VersionRequestMessage

MSG_HomeReset - Static variable in class org.reprap.devices.SNAPStepperMotor

Homereset(??

MSG_IsEmpty - Static variable in class org.reprap.devices.SNAPExtruder

There is no material left to extrude

MSG_QueuePoint - Static variable in class org.reprap.devices.SNAPStepperMotor

Stick a point in the input buffer (firmware v1.4 and greater)

MSG_Seek - Static variable in class org.reprap.devices.SNAPStepperMotor

MSG_SetActive - Static variable in class org.reprap.devices.SNAPExtruder

API for firmware Activate the extruder motor in forward direction

MSG_SetActiveReverse - Static variable in class org.reprap.devices.SNAPExtruder

Activate the extruder motor in reverse direction

MSG_SetCooler - Static variable in class org.reprap.devices.SNAPExtruder

Turn the cooler/fan on

MSG_SetForward - Static variable in class org.reprap.devices.SNAPStepperMotor

API for firmware Activate the stepper motor in forward direction

MSG_SetHeat - Static variable in class org.reprap.devices.SNAPExtruder

Set the temperature of the extruder

MSG_SetIdle - Static variable in class org.reprap.devices.SNAPStepperMotor

Set the motor to idle; this turns the torque off whereas speed = 0 keeps torque on

MSG_SetNotification - Static variable in class org.reprap.devices.SNAPStepperMotor

Set notification (?)

MSG_SetPosition - Static variable in class org.reprap.devices.SNAPStepperMotor

Set the stepper motor position (how?)

MSG_SetPower - Static variable in class org.reprap.devices.SNAPStepperMotor

Set the power to the stepper motor

MSG_SetReverse - Static variable in class org.reprap.devices.SNAPStepperMotor

Activate the stepper motor in reverse direction

MSG_SetSyncMode - Static variable in class org.reprap.devices.SNAPStepperMotor

Set the sync mode (?)

MSG_SetTempScaler - Static variable in class org.reprap.devices.SNAPExtruder

Set the Tempscaler

MSG_SetVRef - Static variable in class org.reprap.devices.SNAPExtruder

Set Vref

MSG_StepBackward - Static variable in class org.reprap.devices.SNAPStepperMotor

Move on step in backward direction

MSG_StepForward - Static variable in class org.reprap.devices.SNAPStepperMotor

Move on step in forward direction

MSG_ValveClosed - Static variable in class org.reprap.devices.SNAPExtruder

Close the valve

MSG_ValveOpen - Static variable in class org.reprap.devices.SNAPExtruder

Open the valve

mul(Rr2Point, double) - Static method in class org.reprap.geometry.polygons.Rr2Point

Scale a point

mul(double, Rr2Point) - Static method in class org.reprap.geometry.polygons.Rr2Point

mul(Rr2Point, Rr2Point) - Static method in class org.reprap.geometry.polygons.Rr2Point

Inner product

mul(RrInterval, RrInterval) - Static method in class org.reprap.geometry.polygons.RrInterval

Interval multiplication

mul(RrInterval, double) - Static method in class org.reprap.geometry.polygons.RrInterval

mul(double, RrInterval) - Static method in class org.reprap.geometry.polygons.RrInterval

mul(Transform3D) - Method in class org.reprap.gui.MouseObject

myExtruderID - Variable in class org.reprap.devices.GenericExtruder

Identifier of the extruder

myPriority - Variable in class org.reprap.comms.GCodeReaderAndWriter