blob: e5db5f3b3b251cbdbb016f454b75d50c4468c101 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
|
# core HAL config file for simulation
# first load all the RT modules that will be needed
# kinematics
loadrt trivkins
# motion controller, get name and thread periods from ini file
loadrt [EMCMOT]EMCMOT base_period_nsec=[EMCMOT]BASE_PERIOD servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[TRAJ]AXES
# load 6 differentiators (for velocity and accel signals
loadrt ddt count=6
# load additional blocks
loadrt hypot count=2
loadrt comp count=3
loadrt or2 count=1
# add motion controller functions to servo thread
addf motion-command-handler servo-thread
addf motion-controller servo-thread
# link the differentiator functions into the code
addf ddt.0 servo-thread
addf ddt.1 servo-thread
addf ddt.2 servo-thread
addf ddt.3 servo-thread
addf ddt.4 servo-thread
addf ddt.5 servo-thread
addf hypot.0 servo-thread
addf hypot.1 servo-thread
# create HAL signals for position commands from motion module
# loop position commands back to motion module feedback
net Xpos axis.0.motor-pos-cmd => axis.0.motor-pos-fb ddt.0.in
net Ypos axis.1.motor-pos-cmd => axis.1.motor-pos-fb ddt.2.in
net Zpos axis.2.motor-pos-cmd => axis.2.motor-pos-fb ddt.4.in
# send the position commands thru differentiators to
# generate velocity and accel signals
net Xvel ddt.0.out => ddt.1.in hypot.0.in0
net Xacc <= ddt.1.out
net Yvel ddt.2.out => ddt.3.in hypot.0.in1
net Yacc <= ddt.3.out
net Zvel ddt.4.out => ddt.5.in hypot.1.in0
net Zacc <= ddt.5.out
# Cartesian 2- and 3-axis velocities
net XYvel hypot.0.out => hypot.1.in1
net XYZvel <= hypot.1.out
# estop loopback
net estop-loop iocontrol.0.user-enable-out iocontrol.0.emc-enable-in
# create signals for tool loading loopback
net tool-prep-loop iocontrol.0.tool-prepare iocontrol.0.tool-prepared
net tool-change-loop iocontrol.0.tool-change iocontrol.0.tool-changed
|
