blob: 3ff30f3a1079a7df549b192058ed2d95ce2d2277 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
|
Generalities
============
The register layout of the pluto-servo is an implementation detail and
may vary from release to release of emc.
The "address" is auto-incrementing after transfers.
Multi-byte data is transferred least-significant-byte-first.
Read registers
==============
The "read" registers (data transfer from pluto to PC) are each 4 bytes
long and start at address 0. Beginning a read within a register (e.g.,
at address 2) results in undefined behavior. Bits without an
interpretation are undefined.
Address Bits Interpretation
0..3 0..20 Stepgen 0 position in 10.10 fixed-point notation
4..7 0..20 Stepgen 1 position in 10.10 fixed-point notation
8..11 0..20 Stepgen 2 position in 10.10 fixed-point notation
12..15 0..20 Stepgen 3 position in 10.10 fixed-point notation
16..19 0..15 Digital inputs 0..15
Write registers
===============
The "write" registers (data transfer from pluto to PC) are each 2 bytes
long and start at address 0. Beginning a read within a register (e.g.,
at address 1) results in undefined behavior. Bits without an
interpretation should be sent as 0.
Address Bits Interpretation
0..1 0..11 Stepgen 0 velocity in +-.10 fixed-point notation
2..3 0..11 Stepgen 1 velocity in +-.10 fixed-point notation
4..5 0..11 Stepgen 2 velocity in +-.10 fixed-point notation
6..7 0..11 Stepgen 3 velocity in +-.10 fixed-point notation
8..9 0..13 Digital outputs 0..13
10..11 0..3 Step time in units of 1600ns
8..11 Direction setup/hold time in units of 1600ns
14 write 1 to enable watchdog and reset WDT
15 step polarity for stepgen 0..3
Notes
=====
Watchdog
========
The watchdog consists of a 7-bit counter and a 1-bit enable which gives a
watchdog period of approximately 6.5ms. At power-up the enable is FALSE. When
bit 14 of register 8..9 is written TRUE, the counter is reset to 0 and enable
is set to TRUE. (there is no provision for resetting the watchdog enable to
FALSE) Every time the PWM counter overflows (approximately 51.2us) the watchdog
counter is incremented if it is not already at its maximum. When the watchdog
counter is at its maximum, the dedicated digital outputs and PWM outputs are
tristated.
|
