1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
|
# EMC controller parameters for a simulated machine.
# General note: Comments can either be preceded with a # or ; - either is
# acceptable, although # is in keeping with most linux config files.
# General section -------------------------------------------------------------
[EMC]
VERSION = $Revision$
MACHINE = gmoccapy
#DEBUG = 0x7FFFFFFF
DEBUG = 0
# for details see nc_files/subroutines/maco_instructions.txt
[MACROS]
MACRO = i_am_lost
MACRO = halo_world
MACRO = jog_around
MACRO = increment xinc yinc
MACRO = go_to_position X-pos Y-pos Z-pos
# Sections for display options ------------------------------------------------
[DISPLAY]
DISPLAY = gmoccapy
#PREFERENCE_FILE_PATH = gmoccapy_preferences
EMBED_TAB_NAME = tool_replacement_panel
EMBED_TAB_LOCATION = box_tool_and_code_info
EMBED_TAB_COMMAND = gladevcp -x {XID} -u signals.py -H signals.hal signals.glade
EMBED_TAB_NAME = coolant_spindle_panel
EMBED_TAB_LOCATION = box_coolant_and_spindle
EMBED_TAB_COMMAND = gladevcp -x {XID} -u plasma.py -H plasma.hal plasma.glade
# Cycle time, in milliseconds, that display will sleep between polls
CYCLE_TIME = 100
# Highest value that will be allowed for feed override, 1.0 = 100%
MAX_FEED_OVERRIDE = 1.5
MAX_SPINDLE_OVERRIDE = 1.2
MIN_SPINDLE_OVERRIDE = .5
# Max and default jog speeds in units per second
MAX_LINEAR_VELOCITY = 166
DEFAULT_LINEAR_VELOCITY = 5
MAX_ANGULAR_VELOCITY = 234
# Prefix to be used
PROGRAM_PREFIX = ../../nc_files/
# Introductory graphic
INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 5
# list of selectable jog increments
INCREMENTS = 1mm, 0.1mm, 0.01mm, 0.001mm
[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Grayscale Depth Image
PROGRAM_EXTENSION = .py Python Script
png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
py = python
# Task controller section -----------------------------------------------------
[TASK]
TASK = milltask
CYCLE_TIME = 0.001
# Part program interpreter section --------------------------------------------
[RS274NGC]
RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.005 G80 G90 G94 G97 M5 M9
PARAMETER_FILE = sim.var
SUBROUTINE_PATH = ./macros
# Motion control section ------------------------------------------------------
[EMCMOT]
EMCMOT = motmod
COMM_TIMEOUT = 1.0
COMM_WAIT = 0.010
BASE_PERIOD = 100000
SERVO_PERIOD = 1000000
# Hardware Abstraction Layer section --------------------------------------------------
[HAL]
HALFILE = core_sim.hal
HALFILE = simulated_home.hal
# Single file that is executed after the GUI has started.
POSTGUI_HALFILE = gmoccapy_postgui.hal
HALUI = halui
# Trajectory planner section --------------------------------------------------
[TRAJ]
AXES = 3
COORDINATES = X Y Z
HOME = 0 0 0
LINEAR_UNITS = mm
ANGULAR_UNITS = degree
CYCLE_TIME = 0.010
DEFAULT_VELOCITY = 9.0
MAX_VELOCITY = 234
POSITION_FILE = position.txt
#NO_FORCE_HOMING = 1
# First axis
[AXIS_0]
TYPE = LINEAR
HOME = 0.000
MAX_VELOCITY = 166
MAX_ACCELERATION = 1500.0
BACKLASH = 0.000
INPUT_SCALE = 4000
OUTPUT_SCALE = 1.000
MIN_LIMIT = -400.0
MAX_LIMIT = 400.0
FERROR = 0.050
MIN_FERROR = 0.010
HOME_OFFSET = 0.0
HOME = 10
HOME_SEARCH_VEL = 200.0
HOME_LATCH_VEL = 20.0
HOME_USE_INDEX = NO
HOME_IGNORE_LIMITS = NO
HOME_SEQUENCE = 1
HOME_IS_SHARED = 1
# Second axis
[AXIS_1]
TYPE = LINEAR
HOME = 0.000
MAX_VELOCITY = 166
MAX_ACCELERATION = 1500.0
BACKLASH = 0.000
INPUT_SCALE = 4000
OUTPUT_SCALE = 1.000
MIN_LIMIT = -400.0
MAX_LIMIT = 400.0
FERROR = 0.050
MIN_FERROR = 0.010
HOME_OFFSET = 0.0
HOME = 10
HOME_SEARCH_VEL = 200.0
HOME_LATCH_VEL = 20.0
HOME_USE_INDEX = NO
HOME_IGNORE_LIMITS = NO
HOME_SEQUENCE = 1
# Third axis
[AXIS_2]
TYPE = LINEAR
HOME = 0.0
MAX_VELOCITY = 166
MAX_ACCELERATION = 1500.0
BACKLASH = 0.000
INPUT_SCALE = 4000
OUTPUT_SCALE = 1.000
MIN_LIMIT = -400.0
MAX_LIMIT = 0.001
FERROR = 0.050
MIN_FERROR = 0.010
HOME_OFFSET = 1.0
HOME = -10
HOME_SEARCH_VEL = 200.0
HOME_LATCH_VEL = 20.0
HOME_USE_INDEX = NO
HOME_IGNORE_LIMITS = NO
HOME_SEQUENCE = 0
HOME_IS_SHARED = 1
# section for main IO controller parameters -----------------------------------
[EMCIO]
EMCIO = io
CYCLE_TIME = 0.100
# tool table file
TOOL_TABLE = torches.tbl
TOOL_CHANGE_POSITION = 100 100 -10
TOOL_CHANGE_QUILL_UP = 1
[PLASMA]
# Note that setting Ignition timeout to high can cause issues with very short cuts, problems can arrise when the timeout has not expired and starting to cut a new part
#- Ignition fault timeout, the time allwed from TorchOn untill ArcOK before re-probing and re-initiating, in seconds
IGNITION_TIMEOUT = 3
#- ArcOK timeout, a filter, for a signal to be valid it needs to exceed the specified time period, in seconds
ARC_OK_FILTER_TIME = 0.2
#- Ignition Retries before abort, the number of attempts to re-probe and start the torch before estop
MAX_FAILED_IGNITIONS = 5
#- Extinguish Timeout, a grace period after loosing ArcOK before shutting off the torch and re-probing, in seconds
EXTINGUISH_TIMEOUT = 0.2
|
