blob: bb3d66b11b0de6c5d63ddd542abc4158d80b10b3 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
|
# core HAL config file for simulation
# first load all the RT modules that will be needed
# kinematics
loadrt trivkins
# motion controller, get name and thread periods from ini file
loadrt [EMCMOT]EMCMOT base_period_nsec=[EMCMOT]BASE_PERIOD servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[TRAJ]AXES
# load 6 differentiators (for velocity and accel signals
loadrt ddt names=ddt_x,ddt_xv,ddt_y,ddt_yv,ddt_z,ddt_zv
# load additional blocks
loadrt hypot names=vel_xy,vel_xyz
# add motion controller functions to servo thread
addf motion-command-handler servo-thread
addf motion-controller servo-thread
# link the differentiator functions into the code
addf ddt_x servo-thread
addf ddt_xv servo-thread
addf ddt_y servo-thread
addf ddt_yv servo-thread
addf ddt_z servo-thread
addf ddt_zv servo-thread
addf vel_xy servo-thread
addf vel_xyz servo-thread
# create HAL signals for position commands from motion module
# loop position commands back to motion module feedback
net Xpos axis.0.motor-pos-cmd => axis.0.motor-pos-fb ddt_x.in
net Ypos axis.1.motor-pos-cmd => axis.1.motor-pos-fb ddt_y.in
net Zpos axis.2.motor-pos-cmd => axis.2.motor-pos-fb ddt_z.in
#net Apos axis.3.motor-pos-cmd => axis.3.motor-pos-fb
#net Bpos axis.4.motor-pos-cmd => axis.4.motor-pos-fb
net Cpos axis.5.motor-pos-cmd => axis.5.motor-pos-fb
#net Upos axis.6.motor-pos-cmd => axis.6.motor-pos-fb
#net Vpos axis.7.motor-pos-cmd => axis.7.motor-pos-fb
#net Wpos axis.8.motor-pos-cmd => axis.8.motor-pos-fb
# send the position commands thru differentiators to
# generate velocity and accel signals
net Xvel ddt_x.out => ddt_xv.in vel_xy.in0
net Xacc <= ddt_xv.out
net Yvel ddt_y.out => ddt_yv.in vel_xy.in1
net Yacc <= ddt_yv.out
net Zvel ddt_z.out => ddt_zv.in vel_xyz.in0
net Zacc <= ddt_zv.out
# Cartesian 2- and 3-axis velocities
net XYvel vel_xy.out => vel_xyz.in1
net XYZvel <= vel_xyz.out
# estop loopback
net estop-loop iocontrol.0.user-enable-out iocontrol.0.emc-enable-in
# create signals for tool loading loopback
net tool-prep-loop iocontrol.0.tool-prepare iocontrol.0.tool-prepared
net tool-change-loop iocontrol.0.tool-change iocontrol.0.tool-changed
net spindle-fwd motion.spindle-forward
net spindle-rev motion.spindle-reverse
#net spindle-speed motion.spindle-speed-out
net lube iocontrol.0.lube
net flood iocontrol.0.coolant-flood
net mist iocontrol.0.coolant-mist
|
