1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
|
# EMC controller parameters for generic controller. Make these what you need
# for your system.
# General note: Comments can either be preceded with a # or ; - either is
# acceptable, although # is in keeping with most linux config files.
# Settings with a + at the front of the comment are likely needed to get
# changed by the user.
# Settings with a - at the front are highly unneeded to be changed
###############################################################################
# General section
###############################################################################
[EMC]
#- Version of this INI file
VERSION = $Revision$
#+ Name of machine, for use with display, etc.
MACHINE = LinuxCNC-HAL-STEP-SIM
#+ Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
DEBUG = 0
# DEBUG = 0x00000007
# DEBUG = 0x7FFFFFFF
###############################################################################
# Sections for display options
###############################################################################
[DISPLAY]
#+ Name of display program, e.g., xemc
# DISPLAY = axis
# DISPLAY = usrmot
# DISPLAY = mini
DISPLAY = axis
# Cycle time, in seconds, that display will sleep between polls
CYCLE_TIME = 0.200
#- Path to help file
HELP_FILE = doc/help.txt
#- Initial display setting for position, RELATIVE or MACHINE
POSITION_OFFSET = RELATIVE
#- Initial display setting for position, COMMANDED or ACTUAL
POSITION_FEEDBACK = ACTUAL
#+ Highest value that will be allowed for feed override, 1.0 = 100%
MAX_FEED_OVERRIDE = 1.2
#- Prefix to be used
PROGRAM_PREFIX = ../../nc_files/
#- Introductory graphic
INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 5
# Editor to be used with Axis
EDITOR = gedit
###############################################################################
# Task controller section
###############################################################################
[TASK]
# Name of task controller program, e.g., milltask
TASK = milltask
#- Cycle time, in seconds, that task controller will sleep between polls
CYCLE_TIME = 0.010
###############################################################################
# Part program interpreter section
###############################################################################
[RS274NGC]
#- File containing interpreter variables
PARAMETER_FILE = stepper.var
###############################################################################
# Motion control section
###############################################################################
[EMCMOT]
#- Name of the motion controller to use (only one exists for nontrivkins)
EMCMOT = motmod
#- Timeout for comm to emcmot, in seconds
COMM_TIMEOUT = 1.0
#- Interval between tries to emcmot, in seconds
COMM_WAIT = 0.010
#+ Base task period, in nanosecs - this is the fastest thread in the machine
BASE_PERIOD = 50000
#- Servo task period, in nanosecs - will be rounded to an int multiple of BASE_PERIOD
SERVO_PERIOD = 1000000
###############################################################################
# Hardware Abstraction Layer section
###############################################################################
[HAL]
# The run script first uses halcmd to execute any HALFILE
# files, and then to execute any individual HALCMD commands.
#
# list of hal config files to run through halcmd
#+ files are executed in the order in which they appear
HALFILE = core_stepper.hal
#HALFILE = xylotex_pinout.hal
HALFILE = sim_pinout.hal
#- list of halcmd commands to execute
# commands are executed in the order in which they appear
#HALCMD = save neta
###############################################################################
# Trajectory planner section
###############################################################################
[TRAJ]
#+ machine specific settings
AXES = 3
# COORDINATES = X Y Z A B C
COORDINATES = X Y Z
HOME = 0 0 0
LINEAR_UNITS = inch
ANGULAR_UNITS = degree
CYCLE_TIME = 0.010
DEFAULT_VELOCITY = 1.2
MAX_VELOCITY = 1.2
DEFAULT_ACCELERATION = 15.0
MAX_ACCELERATION = 20.0
###############################################################################
# Axes sections
###############################################################################
#+ First axis
[AXIS_0]
TYPE = LINEAR
HOME = 0.000
MAX_VELOCITY = 1.2
# NOTE: the step generator module applies its own limits to
# acceleration and velocity. We have discovered that it needs
# to have a little "headroom" over the accel by the trajectory
# planner, otherwise it can fall slightly behind during accel
# and later overshoot as it catches up. In the long term we
# hope to come up with a clean fix for this problem. In the
# meantime, please set STEPGEN_MAXACCEL below to a few percent
# higher than the regular acceleration limit MAX_ACCELERATION
MAX_ACCELERATION = 20.0
STEPGEN_MAXACCEL = 21.0
BACKLASH = 0.000
SCALE = 4000
OUTPUT_SCALE = 1.000
MIN_LIMIT = -10.0
MAX_LIMIT = 10.0
FERROR = 0.050
MIN_FERROR = 0.010
HOME_OFFSET = 0.0
HOME_SEARCH_VEL = 0.0
HOME_LATCH_VEL = 0.0
HOME_USE_INDEX = NO
HOME_IGNORE_LIMITS = NO
#+ Second axis
[AXIS_1]
TYPE = LINEAR
HOME = 0.000
MAX_VELOCITY = 1.2
MAX_ACCELERATION = 20.0
STEPGEN_MAXACCEL = 21.0
BACKLASH = 0.000
SCALE = 4000
OUTPUT_SCALE = 1.000
MIN_LIMIT = -10.0
MAX_LIMIT = 10.0
FERROR = 0.050
MIN_FERROR = 0.010
HOME_OFFSET = 0.0
HOME_SEARCH_VEL = 0.0
HOME_LATCH_VEL = 0.0
HOME_USE_INDEX = NO
HOME_IGNORE_LIMITS = NO
#+ Third axis
[AXIS_2]
TYPE = LINEAR
HOME = 0.0
MAX_VELOCITY = 1.2
MAX_ACCELERATION = 20.0
STEPGEN_MAXACCEL = 21.0
BACKLASH = 0.000
SCALE = 4000
OUTPUT_SCALE = 1.000
MIN_LIMIT = -2.0
MAX_LIMIT = 4.0
FERROR = 0.050
MIN_FERROR = 0.010
HOME_OFFSET = 0.0
HOME_SEARCH_VEL = 0.0
HOME_LATCH_VEL = 0.0
HOME_USE_INDEX = NO
HOME_IGNORE_LIMITS = NO
###############################################################################
# section for main IO controller parameters
###############################################################################
[EMCIO]
#- Name of IO controller program, e.g., io
EMCIO = io
#- cycle time, in seconds
CYCLE_TIME = 0.100
#- tool table file
TOOL_TABLE = stepper.tbl
|
