ver. 1.1.5.3 - solved a bug if the user have NO_FORCE_HOMING in his INI and did a homing of an axis, resulting in some widgets being unsensitive. Thanks to Marius for reportinmg that one - after a tool touch off no G43 was commited even if that code was active so I added that command to be executed Thanks to Rene to report that one - some minor changes to lathe.ini, having HOME two times in the AXIS config ver. 1.1.5.2 - solved a bug, on clear G92 offsets handling, switching the GUI to MDI Mode, due to a strange behavior of the offsetpage widget, not going back to the previous mode. ver. 1.1.5.1 - solved a bug related to the gmoccapy error pin. This pin has not been reseted if the user used the mouse or touch screen and errased the message by clicking the message button. It was only done right if the delete-message pin was used. I modified notification.py to emit a signal if a message has been deleted and conected this signal to gmoccapy. - corrected also a small mistake in _show_errors, it was posible to get messages without text, added a default text. ver. 1.1.5 - added a option to hide the 4'th axis, this is useful if that axis is used to control a tool changer, as than the axis DRO and jog button are not needed. This has to be activated on the settings page, axis 4 is shown by default. This needed some code rework (moving code around) - solved the problem of pin_value changes on start up / initializing, because I introduced a new intern variable self.initialized, leaving defs if not True - introduced a adjustment widget on the settings page to allow the user to set the font size of the DRO, it will be reduced by 3/4 if 4 axis are used ver. 1.1.4 - added again the gcode.lang file, it got lost, after changing gmoccapy to be stand alone - the show screen2 button is now only sensitive if a file gmoccapy2.glade does exist in the config dir. ver. 1.1.3 - it was possible to push btn_set_selected on offset page to set a coordinate system with G92 selected, or being in edit offset mode, this is now avoided. ver. 1.1.2 - after changing units according to G20 / G21 the scales to be applied to the jog wheel pin (jog_vel and max_vel has not been changed, resulting in very large jumps after changing from metric to imperial, i.e. one count should move the slider 100 increments in metric, but did that amount also in imperial, insteadt only advancing 4 steps. - all sliders and vel infos are now changing according to G20/G21 beeing active. - There is still work to do on the offsetpage widget, IMHO it is buggy ver. 1.1.1 - small bug in macro button handling, if a macro was not found, gmoccapy raised an exception, because wrong variable name. ver. 1.1 - this is the "final" version, ready to be included in a release candidate I did not change anything related to the last push, but after 1.10.2, I made a mistake with the release number, this push correct the error. ver. 1.0.3.2 - includes version number also in settings page as label in the botton button bar ver. 1.0.3.1 - previous changes to NO_FORCE_HOMING resulted in automatic starting from line if a line has been selected in preview, I changed that so the line is just presetted, but not taken in care if run is pressed. The other way was to dangerous. ver. 1.0.3 - solved some bugs in NO_FORCE_HOMING not handled the correct way with start button and mode changes after setup page - get rid of hal_toggleaction_run and hal_action_stop, as the run widget caused one of the problems ver. 1.0.2.1 - spindle feedback bar changes will not effect any more the speed label value. It was doble information and at the same time confusing for users. The spindle feedback bar will indicate the real spindle speed and the feed label will show the programmed value. ver. 1.0.2 - solved a bug in getting active gcodes, because I took also the first element of linuxcnc.stat.gcodes, but that seems not to be a gcode, but some kind of control number or something like that, so it causes wrong code and changed gmoccapy behavior in an erroneous way - In this bug finding I also needed to change the gladevcp widget combiDRO to get the correct results ver. 1.0.10.2 - solved a smal bug with _set_spindle in auto mode ver. 1.0.10.1 - gremlin mouse button mode has not been initialized at start up ver. 1.0.10 - changed the behavior of the spindle feedback bar and the speed labels we do not change the bar limits from negative to positive, we use from now on only abs values! That is the reason I did include a additional abs in the postgui hal file - corrected an error, not allowing to switch spindle on / off while program paused ver. 1.0.9 - the ignore limits has not been called, due to a missing signal from the glade file, also the checkbox was hidden if machine off, so it could not be activated after hitting a limit switch. ver. 1.0.8 - Thanks to Steffen Noack we got new gremlin function for the mouse button behavior. Gmoccapy allows selecting the button mode from the settings page ver. 1.0.7.1 - when a external ESTOP was active and the tbtn_estop has been clicked it changed its color, but should not do so, solved - when external estop was active, it was possible to click the on button and the GUI changed state making several widgets sensitive, that behavior was wrong, solved that. - If you feed override has been changed and the machine went into estop, a estop reset also reseted feed override to 100 % , now it will remain with the value it had bevore estop. - If a user activate logging actions, the logging was lost after shutting down the GUI, now the conmtent of alarm_history will be written to a file called gmoccapy.log in your config dir. The file will be overwritten on each shutdown of gmoccapy with the new content. - EXIT Button is now only sensitive, when machine is switched off, so it is not longer possible to accidently shut down the machine. - pressing estop from MDI mode with spindle on, resulted in an error, solved. ver. 1.0.7 - Reworked the emergency button behavior as well as the on/off button, as it was possible to set the GUI in an ESTOP_RESET state, even if an external SWITCH was in ESTOP State. The important bug has been found by Steffen, he also suplied the initial patch, witch has been adapted to my coding style ;-) - Next changed the error handling, separated the error reporting from periodic to an own function, so we are able to lauch also our own errors over the same chanel, and get error pin height and also the sound will be played. - Deleted some unneeded or doble code. ver. 1.0.6.3 - Bug turning on flood with M8 and logging actions on, found by Stephen, solved that one ver. 1.0.6.2 - changed the standard setting of box_custom_? from expand = True to expand=False, so the panel will fit better found from verser building Z_compensation ver. 1.0.6.1 - forgot to set error pin height if an error ocures ;-) ver. 1.0.6 - Stefan found an error in getiniinfo, getting the PROGRAM_PREFIX from INI file, if the entry does not exist. Solved! ver. 1.0.6 - introduced new locations for EMBEDDED_TABS, it is possible to use in addition to the previous ones now also: * box_cooling (will hide the cooling frame and introduce your glade file) * box_spindle (will hide the spindle frame and introduce your glade file) * box_vel_info (will hide the velocity frames and introduce your glade file) * box_custom_1 (will introduce your glade file left of vel_frame) * box_custom_2 (will introduce your glade file left of cooling_frame) * box_custom_3 (will introduce your glade file left of spindle_frame) * box_custom_4 (will introduce your glade file right of spindle_frame) requested from verser ver. 1.0.5 - because of wrong steps in initializing the increment pins has not been made, I changed the init order and now they are there again ;-) ver. 1.0.4 - only plasma - make the gmoccapy_plasma glade pannels react to theme changes after the theme change, a restart of the GUI is necessary ver. 1.0.4 - corrected the way of excecuting a program step by step ver. 1.0.3 - pressing the OFF button will bring you back to manual mode, because there is the "EXIT" button ver. 1.0.2 - solved a spindle button issue and included a check so it is no possible to exceed the limits of the spindle with override values. i.e. a spindle has a max of 6000 rpm and the user enters S 5500 M3 now he can increase the spindle override, but it will be limited by 109 %, because otherwise he would ask the spindle to run faster than allowed. ver. 1.0.1 - solved a bug, because I forgot to include some signals in glade file, so no jogging with button was possible ver. 1.0 - we reached the stable state! gmoccapy get completely separated from gsvreen, resultng in a faster reaction and easieer support and maintanance, as there is now less influence from the other gui. ver. 0.9.9.9.16 - a manual entry in the preference file logo = True in combination with logofile = "absolute path to logofile" will hide the jog button, jog increments and ignore limits and display the logo instead. ver. 0.9.9.9.15 - new hal pin gscreen.error as bit out, to show an error to the hardware, so a light can lit or even stop the machine. It will reseted with the pin gscreen.delete-message. This command will delete the first error and reset the gscreen.error pin to False after the last error has been cleared. Messages or user infos will not affect this pin! ver. 0.9.9.9.14 - The usage of "EMBED_TAB_LOCATION = box_coolant_and_spindle" will not hide the velocity widgets any more, plasma handles that one now over tool_info_panel ver. 0.9.9.9.13 - solved a bug switching on/off the spindle if also log_actions was active, ver. 0.9.9.9.12 - added two hal pin to reset feed and spindle override gscreen.reset-feed-override gscreen.reset-spindle-override ver. 0.9.9.9.11 - solved startup bug, window not starting in position and dimensions as set in settings page - set new limits to size adjustments ver. 0.9.9.9.10 - added a refresh command to iconview, otherwise adding a file and reopeninmg the view, would not refresh the view, so the added file could not be selected ver. 0.9.9.9.9 - I added three new hal pin. This pin do allow to reduce or enlarge the soft limits, so a pin is able to protect your rotary table from colision, because if you do not use it, you just reduce your soft limits, or you got a tool changer in the working area, you do not want a collision during normal work, but you are forced to enter the tool change area to change a tool, so during tool change you enlarge the soft limits. The pins are documented in the WIKI. You will get an error if you reduce the limits and you are outside the area! ver. 0.9.9.9.8 - toggle button setup was not handled correct by hardware momentary switches, fixed that ver. 0.9.9.9.7 - add gcode highlight by clicking in the preview clicking a line in the preview will highlight the corresponding line in gcode listing ver. 0.9.9.9.6 - solved show tool edit after program run after running a program and changing back to manual mode it was not possible to enter again the tool edit tab, as we where taken to MDI mode this was mainly caused by the check for G43 beeing active. ver. 0.9.9.9.5 - changed override behavior: feed override reduce the max velocity and the feed velocity, but the jog vel slider will remain with it's value, the override value will reduce the jog vel also! ver. 0.9.9.9.4 - added a new pin to delete the last message ver. 0.9.9.9.3 - scl_feed_override bug at start up, did not handle G0 Override correct, thanks to Marius for reporting that bug ver. 0.9.9.9.2 - scl_feed_override did not take influence on G0 velocities now it will take influence G1 and G0 velocities ver. 0.9.9.9.1 - there was a bug in tool touch off, discovered by Jim solved that ver. 0.9.9.9 - gmoccapy is now able to do auto tool measurement after an manual tool change - introduced a ini config to simulate that - still to do: If user clickes on aboart while the tool change message window is still open or he closes the window with the small X on the right upper corner, the hal pin will not be reste propery ver. 0.9.9.8.2 - gmoccapy_plasma, changed pin names to follow the pin naming convention - included THC Button state in persistaence (plasma.var) ver. 0.9.9.8.1 - self.data.jog_increments now is self.jog_increments changed the increments handling a little bit so there is no need any more for self.no_increments - changed code from self.gscreen.halcomp to self.halcomp, because it is the same ;-) - prepared to be able to get an gmoccapy hal component ver. 0.9.9.8 - bug in jogging with buttons and SHIFT hold down, as that would result in a move at max velocity, not taking in care the max vel slider - renamed self.data.ob to self.onboard_kb to make code clearer - self.data.plot_view was a relict from gscreen, because gscreen needs to toggle through the views, we can select them directly, so this data is gone now - self.data.hide_cursor is now self.hide_cursor so this is different to gscreen, so both GUI should not influence each other - self.data.key_event_last changed to self.last_key_event (distinguish from gscreen) - corrected some typo in release notes - self.data.file replaced with self.stat.file, as it is not necessary to hold that on data - self.data.estopped replaced with self.stat.task_state - self.data.machine_on replaced with self.stat.task_state - self.data.all_homed is now self.all_homed so I know that this value is not set from gscreen - self.data.spindle_speed and self.data.spindle_direction replaced with self.stat statemenets - self.data.flood and self.data.mist replaced with stat statements - self.data.active_feed replaced with stat statements, resulting in auto units change also for the speed labels - self.data.diameter_mode is now self.diameter_mode so its clear it come from gmoccapy - gremlin does react now on auto_units behavior of Combi_DRO - all sliders (scales) change according to active Gcode G20 / G21 - executing an MDI command will change the keyboard button to allow linuxcnc.aboart() ver. 0.9.9.7.6 - solved the bug wrong units on start up without the preference file I needed to replace gscreen.status with my my own status, because gscreen does deliver wrong values! - changed some more gscreen.data stuff to self.stat..., because IMHO it is not necessary to use data to store something what is available through stat module - replaced the preference file handling from gscreen to an own one, expecting that gscreen does not mess my files up, if no preference file will be given in the INI, we will use gmoccapy.pref stored in the config folder, so there could be different configs with different settings - don't need gscreen.emc any more, all is done now directly with the linuxcnc python bindings - I do not use any more the gscreen.ini, we use now the linuxcnc.ini version from the python module ver. 0.9.9.7.5 - typo in initialize_preferences - deleted the statusbar widget - no more option to use gscreen error handling - no more option to use desktop notify - the optional stops button worked opposite it should - renamed some stuff from emc to linuxcnc or shortened the names - onboard keyboard showing in edit mode corrected - plasma.py changed order of getting widgets from builder, to avoid errors at load time - notification change line wrap mode to character, so longer file names will not be cut ver. 0.9.9.7.4 - the default tool change dialog now shows the tool number and the tool description - after deleting the preferences file you get an error starting the GUI, because it tried to load a file " ", I deleted the SPACE to solve that ver. 0.9.9.7.3 - plasma screen now hide also the vel_info_box - minimal changes on the glade files - modified the plasma.py file to support persistence variables the settings will be stored in plasma.var in your config dir - I set the plasma.py file under GPL license ver. 0.9.9.7.2 - introduced an better gcode highlight for sourceview ver. 0.9.9.7.1 - replaced the hal_scale_jog_vel with a normal scale, as there is no need for a additional hal pin - renamed hal pin gscreen.hal_hbar_spindle_feedback to be gscreen.spindle_feedback_bar gscreen.hal_led_spindle_at_speed to be gscreen.spindle_at_speed_led This way all spindle pins are together in halshow ver. 0.9.9.7 - make gmoccapy react to external mode changes, i.e. start program with net start halui.mode.auto => halui.program.run <= hardware.button ver. 0.9.9.6.3 - changed again the plasma layout, as Marius still want more widgets - most hal labels are not needed any more, so I changed them to gtk.label ver- 0.9.9.6.2 - added a lot of hal pin to gmoccapy_plasma, with the new plasma.py file - reworked the plasma.glade file to fit Marius needs - new order of configs, many files have been moved by Dewey Garret ver. 0.9.9.6.1 - solved a bug in plasma.py, having a call without function ver. 0.9.9.6 - made a new config folder to show gmoccapy as plasma screen - included some minor changes to be able to place user glade panels over the coolant and spindle frame, hiding the original widgets so plasma screen can easy be realized This will hide also the spindle speed label in gcode info frame. - the tool info frame can also be hidden by a user glade file, because tool info is not needed for plasma. - corrected an error in handling python calls in / for user glade screens, as example introduced plasma.glade plasma.hal and plasma.py demonstrating all possible communications ver. 0.9.9.5 - added color chooser for homed and unhomed colors, as recommended by BigJohnT to help people suffering from protanopia (red/green weakness) - corrected an error updating the DRO colors in lathe mode ver. 0.9.9.4 - initializing some warnings at start up, corrected that - deleted some unneeded print messages ver. 0.9.9.3 - if the user tried to make a new file and there where no RS274NGC_STARTUP_CODE in the INI file, an exception has been thrown fixed that bug - if the user tried to make a new file, after he made already one, an exception has been thrown, because the file was loaded already fixed that bug ver. 0.9.9.2 - solved a bug, entering the edit mode from auto mode, caused by a typo in a widget name ver. 0.9.9.1 - solved a bug showing the gremlin DRO, caused by a typo in a widget name - some buttons and widgets did not have tooltip text, added that ones - corrected German translation - corrected Spanish translation ver. 0.9.9 - introduced a new DRO, showing all three positions (Abs, Rel, DTG) at ones user can toggle the DRO by clicking on them - The new DRO also indicates the actual coordinate system - The new DRO will change its units according to the active gcode (G20 / G21) - There are still the three buttons, but they are hidden by default, this can be changed on the settings page, but when the buttons are visible, the user looses the auto units feature of the DRO Hope too get the permission from the users to delete that button as soon as possible - made the documentation for IconViewFileSelection - made the documentation for Combi_DRO - This change saved some lines of code in gmoccapy.py and made the code a lot easier to understand - updated German translation - updated Spanish translation ver. 0.9.8.4 - diameter dro does not show imperial units, even if machine units are imperial, fixed. - tool info only with three digits in imperial mode, now 4 digits - active feed and active vel label not in machine units, if in imperial mode, fixed - cosmetic changes to gmoccapy_lathe.ini - introduced a imperial lathe ini ver 0.9.8.3 - BUG: forget to update the coordinate system after changing the error system, causing the ABS/REL button not showing the correct label, fixed - BUG: inserted Jog Increment continuous instead of 0, so could cause an exception on translated GUI, fixed - BUG: when changing the mode from outside, i.e. starting a program with an external button, the GUI did not change the style to auto mode, so it was not consistent, fixed - deleted unnecessary icon and introduced new icon for machine on off and for the mode button (Thanks to Dejan/probamo) ver. 0.9.8.2 - make the design from spindle and coolant frames more beautiful - added both to a hbox, so later this box may be replaced by user controls, i.e. plasma cutters ver. 0.9.8.1 - introduced new Serbian translation ver. 0.9.8 - introduced notification as gmoccapy error messaging system - rebuild the settings page to make the message system settings available - new default startup position - changed DRO textcolor label to DRO background color label, because that is what you change - jogging with keyboard will jog full speed if SHIFT is hold down - key will delete the last message of gmoccapy message system - + delete all gmoccapy messages at once - switching on the machine will reset the GUI to manual mode - the setup button is no longer a member of the mode radiobuttons it is now a toggle button, so pressing it twice will bring you to manual mode ver. 0.9.7.5.1 - missed to change the version number in gmoccapy_handler.py corrected that ver. 0.9.7.5 - translation of the Continuous Jog Button now possible - solved a bug, when selecting the continuous jog button when it was translated - added ABS, DTG and GTD to translation file - added "show or hide tool path" to translation - corrected a bug changing spindle bar min and max values changed the widget only on restart - added to translation the complete gscreen.py file, even if there are a lot of things nobody need to translate, but that gives the possibility to translate the entry dialogs and some button labels ver. 0.9.7.4 - added the Serbian translation - corrected some mistakes in Spanish translation - moved some files to get them in the corresponding locale folder - modified .gitignore files so my locale folder will not be ignored any more ver. 0.9.7.3.1 - removed some print/debug lines - new order of the button in Auto Mode (requested from svenakela) - corrected some translation errors - changed the order of the jog button and the DRO, now when jogging on a touch screen, the right hand will not cover the DRO. Better handling?! - deleted the button reload from auto to get space for fullsize_preview, so the user can switch to fullsize preview, while the program runs. - errased the close button in bottom button list edit, because the back button does the same - corrected the hardware button behavior, was needed because of the new order and the reason that not "clicked" is emitted, but "pressed" - button edit offsets now shows automatically the offset page - the buttons for fullsize preview on auto and edit offsets getting yellow when active - pressing the button new in edit mode will make a new file in /tmp with the content from [RS274NGC] "RS274NGC_STARTUP_CODE" followed by 3 linefeed and an M2 ver. 0.9.7.3 - the buttons tbtn_view_dimension and tbtn_view_tool_path of the gremlin view was in an undefined state after the start of gmoccapy. Now the state will be set according to the state when leaving the GUI, default is show both - the state view of gremlin was by default "p" no the state on leaving the gui will be restored after restarting the GUI - corrected an error entering the settings page, and aborting the dialog, then the message appears two times, because the signal used was clicked and that is emitted twice on a rbt when changing the state of the buttons in the group ver. 0.9.7.2 - check for NO_FORCE_HOMING included ver. 0.9.7.1 - changed the structure of the files, so the user do not need to copy files after an update he only needs to adapt his config files, this follows the new gscreen structure and all files should be present after installing linuxcnc - corrected some typos in code - changed my way to show the entry dialog as integer only to the gscreen way - added a file chooser to settings page to select the jump to dir for IconFileSelection - file extensions are now taken from INI file and converted from raw data to correct format in an own function, taken in care in IconFileSelection and file to load chooser - solved an error in IconFileSelection, crashing the GUI if button up was pressed being in the root dir ver. 0.9.7 - added a file selection dialog, for touch screen use - in MDI mode it is now possible to add more commands, even if the interpreter is running - do not block any more the spindle buttons while the interpreter is running, so spindle can be switched on and of at any time - added a selection for show keyboard on file selection in settings page - changes button home_4 to show different icon, depending on INI settings of 4th axis - moved some code "G95 related" from periodic to _update_vel - corrected some align values in glade file - removed units from max_vel_label (glade file) - corrected hardware button behavior - added again a sim hardware ini file - uniform usage of "" instead of sometime '' (just to clear python style) - user can select on settings page, if he want the offsettab or the preview tab to be displayed as default, the ntb_tabs are shown, so changing is possible at any time - prepared to get later our own error handling, introduced Notification Class, at the moment disabled - corrected an error if setting the coordinate system after setting axis values in touch off dialog ver. 0.9.6.1 - fixed a bug editing a tool while G43 is active! - added a feature, that will update G43 after a toolchange if it was active on toolchange start - tooloffset in Information frame does now show the real pin values motion.tooloffset.z if connected to gscreen.tooloffset_z in postgui.hal file (for lathe also x values) - cleared the code from some unnecessary ".gscreen." ver. 0.9.6 - included the 4-th axis, buttons will change according to INI file settings - corrected not taken care of PROGRAM_PREFIX path set in the INI file - G95 Bug solved, it was caused from sim_spindle_encoder.hal, using now a modificated hal from axis - cleared a warning of missing handler ver. 0.9.5.1 - bug in spindle switching while in LOG Mode - ESC and F1 keys will work now, even if use Keyboard shortcuts is not activated - solved a bug in run_from_line, the start line was not reseted after program stop, and I missed to reset self.data.restart_dialog to None ver. 0.9.5 - Keyboard shortcuts, now ESCAPE only aborts and F1 emit estop - spindle can be switched on and off while program is paused, without getting an error - sourceview now with search and do / redo, while in edit mode - added an offset page in ntb_preview with the possibility * to select directly an coordinate system * edit the coordinates of every system * give the systems human names - fixed a bug in tooledit, trying to touch of a tool not in spindle, I must check if this should be allowed or if it better only allowing touch off with the tool in spindle - changed gmoccapy keyboard to "onboard", if the layout is not correct, the following command will correct it setxkbmap -layout gb for Great Britan, de for germany, etc. - changes in gscreen broke gmoccapy cycle start seems that hal_action run is not any longer permitted, now hal toggle action is needed, corrected this - changed the entry dialog, so in some cases it is only possible to enter integer values - added a button to select a tool by its number, it is easier, if you have a lot of tools - cleared the code a lot - settings page, it is possible to select if you want to use the onbord keyboard also in tooledit page and in offset page editing - deleted the hardware button simulation ini, because it will not work as it should and I was not able to find a solution. ver. 0.9.4 - corrected a lot of typo, thanks to David for his help - renamed some widgets from "cero" to "zero" - deleted one increment in every INI file, so the GUI fits better to smalest screen size - translation to german included and prepared for more langauges - there was still an error in key handling with incremental jogging, hope I solved it now for final - changed the dialog "run_from_line" to use gscreens default, resulting in the need to rename "hal_sourceview" to "gcode_view" - renamed all pins and definitions from "overide" to "override" because of typo - avoid getting to the touch off button, while the machine is not homed - hide Y touch off buttons in lathe mode - solved a bug executing a command constantly related with feed and periodic - Tool change from tool editor now works like it should even with T1 M6 as with M61 Q1 - the tool in spindle will be checkt if you enter the tool editor. ver. 0.9.3.2 - alligned the jog_button and jog_rates frame on the top (just cosmetic) - The Page-up and Page_Down keyboard keys moved the Z axis in oposide directions - Feed values will only be shown with digit if G95 is active - added classicladder button to the list of buttons to be able to handle it with hardware button - changed hardware button handling to fit also to lathe mode - included a test to avoid speeding the spindle over its limit using the spindle speed overide i.e. max = 6000 but S = 5500 and overide = 120 % would result in 6600, but only 6000 is possible - also check spindle speed if the commands are given trough MDI and overide is to high will reduce the overide value to max allowed ver. 0.9.3.1 - A message window will warn the user in case he try to use G95 - Changed the requiered screen size to fit on 979 x 750 ver. 0.9.3 - included the patch for key_jogging from Chris - support now also back tool lathes - after M61 Q tool change, the Gui didn't leave the MDI modem resulting in problems - the btn_view_Y2 has now a yellow background - changing the max vel slider had no efekt, I fixed this ver. 0.9.2 - added lathe mode - added classicladder button - added button for tool touchoff in X and Z axis - corrected the key handling, now also F1 and F2 works and ESC emit emc.aboart() ver. 0.9.1.2 - trying to jog the machine with the keyboard a python error was lauched, because Chris renamed the data.event_up to data.event_last solved this renaming the data also in gmoccapy ver. 0.9.1.2 - missed renaming one widget in code, due to the changes on the settings page, resulting in an exception solved this renaming the widget in gmoccapy ver. 0.9.1 - show offsets and show dtg for gremlin are only sensitive if show gremlin DRO is actice, other behavior makes no sense - settings page can be reached now also in estop state - desktop notify can be disabled in settings page, makes the gui faster - file to load on start up can be selected on settings page - in init_file_to_load added a selection of filters given in INI File - button save and run has now a tool tip text, it wasn't shown, because it was set translatable and no translation was availible - check on macro excecution for errors before starting the macro - added a checkbox to select the use of keyboard shortcuts - reconnected the sim spindle to gmoccapy - in MDI Mode giving S0 now switch the spindle off - from INI [DISPLAY] min_spindle_overide is used to set the slider limits - spindle settings moved from INI to the settings page and preference file - def init_gremlin now in gmoccapy, to avoid widget name conflicts - DRO settings changed in settings page, checkboxes instead of toggle button and all settings related to DRO in one frame - added scale settings for the hardware mpg encoders to move the sliders, otherwise for max vel beeing 14000 the changes was to small, counting one by one - hardware keyboard now works also in settings page and debug page - Screen2 can be shown now, but I noticed, that if the screen is very complax, the application will crash! ver. 0.9.01 - fixed a bug in keyhandling mentioned by Chris * changing the jog velocity while jogging in continious caused by focus jumping from widget to widget when holding down a key * Keyboard autorepeat caused moving the machine by several increments insteat of only one. ver. 0.9.0 - unlock settings now with tool tip text - I forgot an letter in hal pin feed-overide-counts - The button Rel/Abs changes its label according to the active coordinate system and its background color does change if G54 is not active - solved the estop error not showing the correct sate on start up - solved a bug giving value 0 to macro, the entry widget checkt this value as False - merged with new master and also with gscreen with new widget names - gscreen fired a error when there is no keyhandling in gmoccapy, i introduced a dummy - after start some buttons wasn't set in correct state, it was possible to eneter MDI Mode without homing before. - avoid switching screens to MDI and back to manual on tool change - cooling mist and lube can be switched on and off everytime you want - you can jog the machine in 3 axis with the keyboard button, but only in manual mode this is just a test, I don't now if I leave this feature in gmoccapy - as run from line is not very secure and also not working yet correctly, I made it selectable in the settings page - in settings you can select now qwertz or qwerty keyboard layout - in settings you can select whether the On Screen keyboard are shown by default or not for mode MDI and mode EDIT separetly ver. 0.8.9 - new icon for btn_user_tabs - new icon for btn_fullsize_preview - all dialogs do react to keyboard input now - System theme has not been set properly on start up, fixed this. - added a new place for user tabs, within ntb_preview, showing then the tabs - added a test to show actual velocity in machine units. - added hal pins to be able to connect a hardware selection switch to jog_increment radio button - entering the edit mode sets the focus in the hal_sourceview widget, so working with keyboard is possible without any cklick - After edditing the tool offsets in table, the button "Apply" will not only aply the changes to tool table, but also to the tool in spindle, but only if G43 is in active g-codes - speeded up the tool change screen refresh, by adding self.on_hal_status_interp_idle(self) in the button press event - added hal pins for joging the axis with hardware buttons for each axis in self.data.axis_list - deleted the metric button from settings page - changed hal_pin_names to use "-" insteadt of "_" - on tool table page I missed to add tool tip text to the buttons, I added them now - added a hal pin to unlock the settings page, so a key-switch can be used to unlock the page ver. 0.8.8 - there was an error getting the increments from the INI file I begin counting from 1 instead of 0, that is why the first increment was missing - solved a problem while switching flood or mist on/off with MDI commands, the buttons got active like they should, but the icon didn't change from on/off, solved that changin _update_coolant - when the tool was changed using M61Q, the screen has not been set back to manual mode properly, this was caused by asking if tool:, but as at the beginning toolnumber is cero, this decision was taken wrong, after changing it to if tool or tool == 0: it does work - running a macro changed the image and function of the keyboard button, but the tool tip text didn't change, I fixed this. - it was possible to reduce the max_vel of the machine less than the jog_velocity, so it was possible to jog faster than the max velocity you set with the corresponding slider I fixed this, if you reduce max-vel lower than jog_vel, jog vel will be reduced too - spindle bar won't grow with negative values (spindle reverse); I know it worked allready, why did I have to fix this again? - entereing the MDI Mode sets the focus directly to the enty of hal_mdihistory ver. 0.8.7 - changed the button to delete status bar messages from text to icon - changed the INI files to display the side panels viceversa - made vcp_box.glade fit better in the screen ver. 0.8.6 - all buttons on settings now with active back color "yellow" - added a button to set logging or not, will add later a option to store the logging in a hidden file - solved a bug switching fullscreen views, I missed to add a size request to window1 in glade file, smalest window possible = 979 x 782 - added a button to clear the statusbar information - new hal-pin jog_increment as float out pin - copied init increments from gscreen to gmoccapy and modified it to not get added an contious at the end, I want it with first upper letter and as first position, to not get problems while creating the buttons dynamecaly - removed some print commands - changed the test for gremlin DRO from preferences file to button state - made hal pins to conect MPG Wheels to the sliders * gscreen.spindle_overide_counts * gscreen.feed_overide_counts * gscreen.max_vel_counts * gscreen.jog_speed_counts Does anyone know, why the connection in postgui hal change the jog counts by one and modify this way the scale from 100 to 101? ver. 0.8.5 - included a button to toggle gremlin fullview but getting out of the fullscreen mode will hide the DRO not taking care of preferences, I do not not why - implemented a function to set gremlin grid Grid is set in INCH, not taking care of the preferences file ver. 0.8.4 - thanks to Chris the software starts now on a new installation with "Follow System Theme" theme - Keyboard now with upper and lower letters (SHIFT Key included) ver. 0.8.3 - there was still a problem with DTG and DRO switching, now everythink is working like it should - now not the gscreen colors are used, on first start every color is set to black, after that the colors are handled as they are in gscreen. - Delete MDI is working, but until now only for the running session - I deleted some lines of code in 0.7.05, resulting in demaging the tool editor, fixed this - reorganized the order from buttons to be modified during INIT, now they are in alphabetic order - made several INI Files to show the behavior with side panels and user tabs and simulated hardware button - included the following buttons in settings page - enable gremlin DRO - Show gremlin DTG - show gremlin offsets - check if tool in spindle == tool to change, then give message and return ver. 0.8.2 - solved the error related to the DTG Button - clearing the code - added a SPINDLE section to INI to get the min and max spindle speed - change the spindle bar propertys by code to show also negative revolutions - spindle speed label shows also negativ values if spindle runs reverse - solved a bug in macro excecution, when wrong values has been given ver. 0.8.1 - clearing the code - unlock code now in the hiddeen preference file, but I still need to include an change function in the settings page - emergency exit is now default on start - there is still an error changing from DTG to GTD in ABS and REL changing ver. 0.8.0 - colorselection for the diferent dro states now works, but there is still a small error, after changing a color, it will not show the eventboxes in propper color. After a new start of gmoccapy it works like it should. I searched allready three days for a solution, but I couldn't find any. - removed some unused print() commands - gmoccapy.glade is now able to add side panels, on the left and right - user tabs are working, I need to make some dokumentation ver. 0.7.09 - changed tool change dialog from axis dialog to gscreen dialog, you can switch back if you like by comenting the tool change lines in postgui.hal file. - btn not implemented clicked now logs the button ver. 0.7.08 - merged with /origin/master instead of mah/master - using now hide_buttonbox from tooledit widget instedt of hiding the box by an own method - solved a problem reported by Chris, blinking coolant button. The behavior was caused from _update_coolant() - renamed tbtn_coolant to tbtn_flood - bugfix on macro goto position caused from self.on_btn_macro_pressed() - finshed the hal connections also for the vertical buttons to test with simulated buttons, you have to uncomment the coresponing lines in INI and postgui.hal then two buttonlist will aperear - There was a problem excecuting the macros with the hardware button, user where able to start a second macro while the first was still running, solved that - Running macros can be aborted, the show_keyboard button will change it's image and get an other function ver. 0.7.07 - solved a problem switchung main button list, wait on tool change has not been reseted properly - now I hide the hbuttonbox of tooledit widget instead of every button, this saved 6 lines of code :-) ver. 0.7.06 - finshed the h_button hardware pin connection - macros can be run by hardware button to test the features, just uncomment 3 lines in INI File DISPLAY section, see comments there and uncomment the connections made in gmoccapy_postgui.hal I need someone to test this with real hardware, as with gladevcp buttons there seems to be a problem with the mode settings, change a tool with M61 will not bring you back in manual mode using the software keys, due to gladevcp in my opinion. ver. 0.7.05 - made the tooledit button work on my layout - all bottom button have there own hal pins, witch can be connected to hardwre button so no touch screen is needed. v_button still to do and macros not working jet. - added an icon for tool-change ver. 0.7.04 - added preference file path to INI file - added the release notes file - hide the button of tooledit widget - all tool change thinks are now done with the tool_edit_widget by selecting the tool from the list ver. 0.7.03 - added Release Number to title bar, so it is easer for users to see if they got the latest release ver. 0.7.02 - added the capability to launch macros with variable parameters - MDI and Auto mode can now only be reached if state all_homed = True - added sample macros ver. 0.7.01 - changed the foldername to use only lower letters - cleared the directory gmoccapy, all hal files are now again symbolic links - renamed the scripts folder to subroutines and moved it in the nc_files folder - icons folder not touched at the moment - changed INI File to use other paths and renamed SCRIPTS to nacros, next it will be changed to be the same as in touchy ver. 0.7.00 - finished the keyboard, it does now scroll in EditMode as well as in MDI Mode - Solved a problem with the index tool button, it stays unsensitive after an machine off, now it is working like it should - smaler changes in the icon folder ver. 0.6.09 - some more new icon - merged with master - added some new icon - changed the position from the right button - in emergency state the button to close gmoccapy was disabled, so it wasn't possible to close the application in fullscreen mode. ver. 0.6.08 - Virtual Keyboard included and working on MDI and AUTO Mode unfortunately the coresponding windows will not scroll as they should - bug found in setting G54 origin, solved! ver. 0.6.07 - I finished the keyboard, in editing mode it is working fine in MDI mode I have to find out, how to move the selected row in the hal_mdi_history using the cursor buttons! ver. 0.6.06 - Edit program works - make new programs works too - new keyboard with nearly all keys - Attention: On editing a program the keyboard need some more fine polishing, to allow editing text in the middle and I have to include cursor keys ver. 0.6.05 - begin to include the edit mode for g-code programs not working jet, still work to do The grafics part is finished, just the icon are not very nice ver. 0.6.04 - changed hal pin connections to control homing to gscreen matter so nearly all conections to postgui hal are not needed any more - all messages prepared to get translated _(message) - Run from line is now included, but at the moment without control of previos lines, this is still to do. - settings page begin to work + fullscreen is included + hide cursor is working + sounds are selectable + spindle start rpm is working ver. 0.6.03 - optional blocks now working - optional stops working too - added missing button in MDI Keypad (I missed I ; J ; K ) - cooling and spindle buttons react to emc stat, so setting an M7 will toggle the corresponding button, so will an M3 or an M5 This is not working in AUTO MODE with interpreter running to avoid error messages. - changed the test files to have optional blocks and stops. ver. 0.6.02 - all icons moved to icon folder - implemented get toolinfo, tool frame now shows correct data - implemented user mdi command through gscreen, so there is no need any more to import linuxcnc - added some more icon ver. 0.6.01 - solved the problme that widgets don't get sensitized after a pause and a later resume. - there will apear an error if in Pause you push coolant or spindle button because the command mode will be changed, the programm will run later as usual ver. 0.6.00 - mostly I changed the name to Gmoccapy as invented by Chris - some minor changes in code ver. 0.5.08 - program label at start up was wrong - after pushing manual button staying in settings, main button list was not changed back to manual - max velocity now again in units per minute, seems Chris changed it back ver. 0.5.07 - axis setting to an value with preferences is working fine - DRO labels changing colors like they should - Added a button to set tool with M61 Q? - Commented a little bit more the code - prepared INI File for scripts execution - Fullscreen is included now - HalScope Button added - Prepared to execute MDI commands, will later read them also from the INI File as HALUI_COMMAND ver. 0.5.06 - added hal scope - cleared the code a little bit more - removed unused jog-increment-out pin ver. 0.5.05 -cleaned up and solved merge conflicts This is a version for first tests by users!